Avaya S8100 User Manual
2
Connectivity and access to an S8100 system
Access methods
S8100 Installation and Upgrades
157
November 2003
6
Make the login a member of officeadmin and Users groups, and click OK.
7
Click Dialin at the bottom of the dialog.
8
Check the Grant dialin permissions and No Call Back boxes, and click OK.
9
Click OK in the New User dialog.
10
Close User Manager.
Starting an Avaya Site Administration session
The customer must dial into the system to establish a PPP connection, and then start their Avaya Site
Administration session. To set up a computer to dial into the system, perform these steps:
Administration session. To set up a computer to dial into the system, perform these steps:
1
Go to My Computer.
2
Double-click Dial-Up Networking.
3
Double-click Make New Connection.
4
Fill in the name field; the system should fill in the correct modem attached to the PC; if not,
choose the modem that is attached to the system.
choose the modem that is attached to the system.
5
Click Next.
6
Fill in the Area code and Telephone number for the system.
7
Click Next.
8
Click Finish in the window saying that the connection was created.
9
In the Dial-Up Networking window, right-click your connection icon.
10
Left-click Properties.
11
Click the Server Types tab.
12
In the Type of Dial-Up Server drop-down menu, select PPP: Windows 2000, 95, NT 3.5, Internet.
13
Under Allowed network protocols, only TCP/IP should be checked.
14
Click OK, when finished.
15
Access the system by double-clicking the connection icon.
16
On the Connect screen, enter the correct User name and Password.
17
Click Connect.
18
When the connection is established, a screen appears. Click the Continue box.
NOTE:
A login window bay appear saying that the connection was successful.