Avaya S8100 User Manual
3
System initialization
S8100 Installation and Upgrades
159
November 2003
3
System initialization
This chapter describes the procedures needed to initialize the S8100 system.
Starting with Release 10 for S8100, telephony features are activated or deactivated by the license file.
The System Parameters Customer Options form is no longer used to activate/deactivate features – you
can still display this form to see which features are activated, but you cannot use it to turn features on and
off.
The System Parameters Customer Options form is no longer used to activate/deactivate features – you
can still display this form to see which features are activated, but you cannot use it to turn features on and
off.
This chapter is organized as follows:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This chapter describes administration procedures using the SAT interface. Normally, this interface uses
the function keys F1–F10 on your SAT terminal or PC to perform SAT functions. However, if you are
running Windows 2000 on your PC and are using the W2KTT terminal emulation, you need to use Esc-
key sequences to perform these functions instead of the function keys. The following table shows the
escape-key sequence for each action.
the function keys F1–F10 on your SAT terminal or PC to perform SAT functions. However, if you are
running Windows 2000 on your PC and are using the W2KTT terminal emulation, you need to use Esc-
key sequences to perform these functions instead of the function keys. The following table shows the
escape-key sequence for each action.