Avaya S8100 User Manual
Checklists and job aids
Upgrade an S8100’s R9.5 software by replacing the S8100
S8100 Installation and Upgrades
27
November 2003
Upgrade steps
Step
Details
1
For a direct connection between the
technician’s laptop and the S8100’s service
port:
technician’s laptop and the S8100’s service
port:
LT
– Change laptop’s IP address to
192.11.13.5
a
Right-click the 'Network Neighborhood' {My
Network Places} icon on the laptop’s desktop and
select Properties.
Network Places} icon on the laptop’s desktop and
select Properties.
b
{Right-click ‘PCMIA Ethernet Connection’ (or Local
Area Connection) and select Properties.}
Area Connection) and select Properties.}
c
Highlight the TCP/IP icon from the popup window
and select Properties. Check the ‘Specify an IP
address’ {‘Use the following IP address’} radio
button.
and select Properties. Check the ‘Specify an IP
address’ {‘Use the following IP address’} radio
button.
d
Enter
192.11.13.5
in the IP address field and
255.255.255.252
in the subnet mask field, and click
OK to close the popup windows.
2
LT-IE
– Disable proxy servers on Internet
Explorer.
a
Open Internet Explorer and select Tools, Internet
Options, the Connections tab, and LAN Settings.
Options, the Connections tab, and LAN Settings.
b
Uncheck the ‘Use a proxy server’ radio button, and
click OK to close the popup windows.
click OK to close the popup windows.
3
Connect the laptop to the R9.5 Processor
board (TN795).
board (TN795).
a
Connect a cable from the laptop’s PCMCIA Ethernet
card to an RJ45 coupler.
card to an RJ45 coupler.
b
Connect a cross-over (flip) cable from the coupler to
the PCMCIA network-interface card in the TN795’s
PCMCIA slot.
the PCMCIA network-interface card in the TN795’s
PCMCIA slot.
4
LT
– Connect to the TN795 processor.
a
Click Start, Run, and enter
telnet 192.11.13.6
.
b
Log in using
lucent3
. – The LAC prompt displays.
5
LAC
– Open a bash shell by typing
bash
at
the LAC prompt.
Type
bash
at the LAC prompt.
6
BS
– Important! – Display and record the
customer’s network and product
information.
information.
a
From the bash shell, execute the following three
commands –
commands –
setip
,
productid
,
oss
.
b
Write down all of this information exactly as it
appears on the screen.
appears on the screen.
You will need to re-enter
this information later.
7
BS
– Shutdown AUDIX.
Type
shutdown audix
. When the BASH prompt returns
(the Audix shutdown takes a few minutes), type
statapp
to
verify that AUDIX has shutdown.
8
BS
– Exit the bash shell and return to the
LAC prompt.
Type
exit
.
9
LAC
– Open a SAT window.
Type definity to open a SAT window. (The terminal type is
‘NTT’ {‘W2KTT’}.)
‘NTT’ {‘W2KTT’}.)
10
SAT
– Save the DEFINITY translations to
the hard drive and logoff the SAT window.
a
Execute
save translations
.
b
When the save translations operation is finished,
execute
execute
logoff
to logoff the SAT window and return
to the LAC prompt.