Avaya S8100 User Manual
1
Install and cable a G600 cabinet
S8100 Installation and Upgrades
57
November 2003
1
Install and cable a G600
cabinet
This chapter describes procedures for installing and cabling the cabinet to physically connect and access
an S8100 Media Server with G600 Media Gateways. Also, for either a G600 or CMC1 Media Gateway,
Section II of this chapter describes procedures for installing telephones and making auxiliary
connections.
an S8100 Media Server with G600 Media Gateways. Also, for either a G600 or CMC1 Media Gateway,
Section II of this chapter describes procedures for installing telephones and making auxiliary
connections.
NOTE:
A G600 is a rack-mounted cabinet, whereas a CMC1 is a wall- or table-mounted cabinet.
For information about installing a CMC1 cabinet, see Appendix I –
For information about installing a CMC1 cabinet, see Appendix I –
NOTE:
The physical installation of a G600 cabinet is similar to a ProLogix cabinet. The cabling is
also similar, except for the Processor Interface cable (multileg cable). Do not access
applications, such as Communication Manager, until installation and cabling of the
cabinet are finished. Your configuration can consist of an S8100 Media Server with 1, 2,
or 3 G600 Media Gateways.
also similar, except for the Processor Interface cable (multileg cable). Do not access
applications, such as Communication Manager, until installation and cabling of the
cabinet are finished. Your configuration can consist of an S8100 Media Server with 1, 2,
or 3 G600 Media Gateways.
This chapter is organized as follows:
•
•
•
•
•
•
•
•
•
•