LOEWE Individual 32 Compose 3D User Manual
115 -
english
Digital Link HD
Digital Link HD ( HDMI CEC)
The Digital Link HD (HDMI CEC) system operation allows Loewe television
sets to transmit the remote control signals via the HDMI connection of a
TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. You
can therefore set up a concealed CEC capable HDMI device.
The Digital Link HD (HDMI CEC) system operation allows Loewe television
sets to transmit the remote control signals via the HDMI connection of a
TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. You
can therefore set up a concealed CEC capable HDMI device.
Concealed installation of HDMI devices
For this, first assign the HDMI CEC function with Code 22 to the required
device button (REC, DVD or AUDIO) as described on page 127.
Now assign the Digital Link HD function to the used HDMI device.
For this, first assign the HDMI CEC function with Code 22 to the required
device button (REC, DVD or AUDIO) as described on page 127.
Now assign the Digital Link HD function to the used HDMI device.
Assign HDMI device
➠ The CEC capable HDMI device is connected to one of
the HDMI sockets of the TV set and switched on.
Press required button for 5 seconds.
A selection menu appears on the TV set.
Select required device from the list.
OK Adopt.
From now on, the commands of the remote control are
communicated from the TV set to the HDMI device, if
the corresponding device button (REC, DVD or AUDIO)
has been pressed previously.
communicated from the TV set to the HDMI device, if
the corresponding device button (REC, DVD or AUDIO)
has been pressed previously.
Adjust Geometry (only possible with certain signals)
This allows you to shift the picture (horizontally and vertically) so that it
fills the entire screen.
This allows you to shift the picture (horizontally and vertically) so that it
fills the entire screen.
➠ When connecting a PC to an HDMI socket of the TV set, set the out-
put signal at your PC beforehand so that it corresponds to one of the
signals in the table on page 137.
signals in the table on page 137.
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select more ...,
OKcall.
Select PC IN display,
go to the menu line below.
Select the desired setting,
go to the menu line below.
Make settings.
OK
OK
HINT
Here you select the device which you want to switch over your remote control
to with the key. After confirming the selection with OK all remote control
commands are passed on to the selected device via the TV set in future when
you press this key.
Here you select the device which you want to switch over your remote control
to with the key. After confirming the selection with OK all remote control
commands are passed on to the selected device via the TV set in future when
you press this key.
SELECT HDMI DEVICE FOR KEY
AUDIO
AudioVision
No device
Adopt
AUDIO
External devices
Picture vertical
MENU TV
Picture
PC IN display
Picture
PC IN display
Picture horizontal
66