LOEWE Individual 32 Compose 3D User Manual

113 -

➠  A DVD recorder has been selected in the TV Menu under Connections ט 

AV connecting settings 

ט Device at connection AV (see also page 110).

Switch off all equipment before connecting.
Connect the Euro-AV output of the DVD recorder to the AV socket of 
the TV set. 
Use a fully equipped Euro-AV cable (available from your dealer) for this.
If you want to receive and record analogue stations with the receiver 
(tuner) built into the recorder, the recorder must be looped into the 
aerial cable. 
Connect the DVD recorder as shown in the connection example below.

➠  If you want to record DVB stations with an external recorder, the 

internal receiver of the TV set must be used (see Timer recording with 

external devices on page 126).

Call AV selection.

Select AV,

  OK switch over.

Start playback on the connected device.

Connecting Camcorder/camera
Switch off all equipment before connecting.
Connect the AV output of the camcorder to the sound input sockets 

AUDIO IN L (white) and AUDIO IN R (red) and the AVS connection of the 
side AV sockets of the TV set.
Use the AV cable enclosed with the camcorder for this. 
Some camcorders only supply an FBAS signal instead of an S-Video signal 
at the AV output. In this case use the VIDEO IN input (yellow).

If your camcorder has an HDMI output, you can also connect the ap-
pliance via the HDMI socket HDMI3 on the side (see connections page 
11 or Devices to the HDMI connections page 114).

Call AV selection.

Select AVS,

  OK switch over.

Start playback on the connected device.

Connection example of a DVD recorder

TV set

DVD recorder

AV

ANT TV

TV set

Camcorder

AUDIO IN L/R

AVS

Connection example of a camcorder

OK

AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN

AVS

AV
VIDEO

Switch to ...
 

OK

AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN
AVS

AV

VIDEO

Switch to ...
 

External devices

ANT IN

ANT OUT

AV

R

TV