LOEWE Individual 32 Compose 3D User Manual
- 88
english
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without VPS (analogue) or auto time control (DVB) (see also page 108).
This minimizes the risk that a part of the broadcast is not recorded due
to the broadcast starting earlier and/or finishing later.
You can set a pre-record and post-record time for timer recordings made
without VPS (analogue) or auto time control (DVB) (see also page 108).
This minimizes the risk that a part of the broadcast is not recorded due
to the broadcast starting earlier and/or finishing later.
MENU:
Call TV menu.
Choose Recording,
switch to the menu line below.
Set pre-record or post-record time,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record: 00 min,
post-record: 05 min.
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record: 00 min,
post-record: 05 min.
DR+ Streaming settings
Enter here whether recorded broadcasts within your TV
set’s DR archive are to be accessible for viewing from
other TV sets (server function).
other TV sets (server function).
Setting yes enables you, via the DR archive, to also view
recordings from other TV sets that have accessible films
within the home network (client function).
recordings from other TV sets that have accessible films
within the home network (client function).
Give your TV set a unique name for quick identiÆ cation
in DR+ Streaming.
in DR+ Streaming.
Give a name for your TV set group.
Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
name can exchange data.
IP port numbers are preset ex-factory. Under normal
circumstances they do not require amending.
circumstances they do not require amending.
Set here how long your TV set is to continue to give access
to Æ lms after calling DR+ Streaming within the MediaPor-
tal (refer also to the operating instructions of the TV set).
This stand-by period is also activated as soon as data
exchange to another TV set has been completed.
to Æ lms after calling DR+ Streaming within the MediaPor-
tal (refer also to the operating instructions of the TV set).
This stand-by period is also activated as soon as data
exchange to another TV set has been completed.
Post-record time Recording wizard
list
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
Recording
Pre-record time
00 min (0 - 15)
DR+ STREAMING SETTINGS
Share the DR archive with other TVs yes
Using the DR archives of other TVs yes
DR
DR
device
name
LOEWE
TV
DR
device
group
name
Home
IP
port
number 17123
DR
standby
2
hrs
no
Share the DR
archive with
other TVs
Using the DR
archives of
other TVs
DR device
name
DR device
group name
IP port
number
DR standby
Digital Recorder