Kenwood UBZ-GR14 User Manual
4
ENGLISH
I
NSTALLING
/ R
EMOVING
THE
B
ELT
H
OOK
1
Align the belt hook tabs with the guides on the rear of the
transceiver.
transceiver.
2
Slide the belt hook down the guides until it locks in place.
3
To remove the belt hook, pull back on the lever on the top
of the belt hook and slide the belt hook out of the guides.
of the belt hook and slide the belt hook out of the guides.
I
NSTALLING
/ R
EMOVING
THE
S
TEREO
H
EADPHONES
Note: Always switch OFF the transceiver power when installing or
removing the headphones.
removing the headphones.
1
Open the SP tab on the
top of the transceiver.
top of the transceiver.
2
Insert the headphone
plug into the SP jack.
plug into the SP jack.
3
When you remove the
head-phones from the
transceiver, be sure to
cover the SP jack with
the attached tab in
order to keep dust and
dirt away from the contacts.
head-phones from the
transceiver, be sure to
cover the SP jack with
the attached tab in
order to keep dust and
dirt away from the contacts.
UBZ-GR14 E 1-20
01.4.12, 9:35 AM
4