Kenwood UBZ-GR14 User Manual
5
ENGLISH
I
NSTALLING
/ R
EMOVING
O
PTIONAL
A
CCESSORIES
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
removing the optional accessories.
The following accessories can be used with this transceiver:
•
SMC-34 Speaker-Microphone
•
HMC-3 Headset
•
EMC-3 Clip Microphone with Earphone
To install these accessories:
1
Open the MIC-SP tabs on the top of the transceiver.
2
Insert the accessory’s plugs into the MIC-SP jacks.
3
When you remove the accessory from the transceiver, be
sure to cover the MIC-SP jacks with the attached tabs in
order to keep dust and dirt away from the contacts.
sure to cover the MIC-SP jacks with the attached tabs in
order to keep dust and dirt away from the contacts.
Note:
◆
Refer to the accessory instruction manuals for detailed instruction
on each of the accessories.
on each of the accessories.
◆
The 3 programmable function keys on the SMC-34 cannot be used
with this transceiver. To use the speaker-microphone, press the
PTT switch to transmit and release it to receive. You can also
adjust the volume level using the SMC-34 Volume control.
with this transceiver. To use the speaker-microphone, press the
PTT switch to transmit and release it to receive. You can also
adjust the volume level using the SMC-34 Volume control.
UBZ-GR14 E 1-20
01.4.12, 9:35 AM
5