Panasonic KX-FG6550 User Manual
3. Telephone
53
3.18 Room monitor feature
This feature allows you to listen in on a room
where a handset or base unit is located. The
monitored extension will not ring, allowing you to
easily monitor, for example, a baby’s room from
different areas of the house. If you want to
prevent your unit from being monitored by other
extensions, leave this feature OFF (default
setting). An extension currently in use cannot be
monitored.
where a handset or base unit is located. The
monitored extension will not ring, allowing you to
easily monitor, for example, a baby’s room from
different areas of the house. If you want to
prevent your unit from being monitored by other
extensions, leave this feature OFF (default
setting). An extension currently in use cannot be
monitored.
L
Keep the front cover page open for button
locations.
locations.
3.18.1 Turning ON the room
monitor feature (Handset)
monitor feature (Handset)
This allows the handset to be monitored.
Make sure the handset is not being used.
1
Press {MENU}.
2
Press {0}{9}.
3
Press {1} to select “
On”.
L
Press {0} to select “
Off”.
4
Press {SAVE} (soft key).
5
Press {OFF}.
3.18.2 Turning ON the room
monitor feature (Base unit)
monitor feature (Base unit)
This allows the base unit to be monitored.
1
Press {MENU}.
2
Press {#}, then {7}{4}.
3
Press {1} to select “
ON”.
L
Press {2} to select “
OFF”.
4
Press {SET}.
5
Press {MENU}.
Note:
L
3.18.3 Monitoring a room
Important information:
The unit to be monitored must not be in use.
The unit to be monitored must not be in use.
With the handset
1
Press {HOLD/INTERCOM}.
2
Press {MONITOR} (soft key).
3
To call the base unit, press {0}.
To call another handset, enter its extension
number ({1} to {4}).
number ({1} to {4}).
L
Your handset will start to monitor the
room through the destination unit.
room through the destination unit.
L
To monitor from the speaker, press {SP-
PHONE}. You can place the handset on
the charger and continue monitoring. To
switch back to the receiver, press
{
PHONE}. You can place the handset on
the charger and continue monitoring. To
switch back to the receiver, press
{
TALK}.
L
The monitored unit will display “
Room
monitor”.
L
If an incoming call is being received, you
will hear 2 tones (feature 13 on page 88).
To answer the call, select the called line
by pressing {LINE1} (soft key) or
{
will hear 2 tones (feature 13 on page 88).
To answer the call, select the called line
by pressing {LINE1} (soft key) or
{
LINE2} (soft key).
4
To end monitoring, press {OFF}.
L
The base unit user can stop being
monitored by pressing
{
monitored by pressing
{
LOCATOR/INTERCOM} or {SP-
PHONE}. The monitored handset user
can stop being monitored by pressing
{
can stop being monitored by pressing
{
OFF}.
With the base unit
1
Press {LOCATOR/INTERCOM}, then press
{
{
MUTE}.
2
To call the handset, enter its extension
number ({1} to {4}).
number ({1} to {4}).
L
The base unit will start to monitor the
room through the handset.
room through the handset.
L
The monitored unit will display “
Room
monitor” then the duration time.
L
If an incoming call is being received, you
will hear 2 tones (feature #73 on page 83
and feature 0*2 on page 90). To answer
the call, select the called line by pressing
{
will hear 2 tones (feature #73 on page 83
and feature 0*2 on page 90). To answer
the call, select the called line by pressing
{
LINE1} or {LINE2}.
3
To end monitoring, press
{
{
LOCATOR/INTERCOM} or {SP-PHONE}.
L
The monitored handset user can stop
being monitored by pressing {OFF}.
being monitored by pressing {OFF}.
Note:
L
If the room monitor feature of the destination
unit is OFF, “
unit is OFF, “
DENIED” will be displayed and
busy tone will sound.
FG6550-PFQX2225ZA-en.book Page 53 Monday, August 8, 2005 8:16 PM