Leica DM4000B User Manual
17
5. Assembly
• From above, set the stage clamp onto the
dovetail guide (4.2) and push the stage down-
wards until the upper end of the dovetail guide
is tightly fastened to the upper end of the
stage clamp.
wards until the upper end of the dovetail guide
is tightly fastened to the upper end of the
stage clamp.
• Firmly tighten the stage clamp (4.1).
Note:
For thicker specimens (Leica DM4000 M) the
stage can be set to a correspondingly lower
level.
stage can be set to a correspondingly lower
level.
1
2
Fig. 4
Assembling the stage
1
Stage clamp
2
Dovetail guide
5.1 Stage
Caution:
Before assembling the stage, make sure no ob-
jectives are installed!
jectives are installed!
• Place the specimen holder on the stage and
fasten it with the two screws (3.1).
• Using the condenser height adjuster (3.2), turn
the condenser holder completely upwards, i.e.
as close to the stage as possible.
as close to the stage as possible.
• Loosen the stage clamp (3.3) slightly.
!
2
3
1
Fig. 3
Mechanical object stage
1 Locking screws for specimen holder
2 Condenser height adjuster
3 Stage clamp
2 Condenser height adjuster
3 Stage clamp