Leica DM4000B User Manual

18

• Using the condenser height adjuster (5.4), turn

the condenser holder (5.1) completely down-
wards.

• Unscrew the clamping screw for the con-

denser (5.3) far enough so that the condenser
can be inserted from the front.

• From the front, insert the condenser into the

condenser holder as far as it will go. On the
underside of the condenser, there is an orien-
tation pin (6.1), which must be located in the
guiding notch (7.1).

• Pull the condenser’s clamping screw (5.3) so

that the condenser is locked in place.

• Connect the condenser over the connection

(8.1) with the stand.

Condenser holder

1 Condenser holder
2 Condenser centering
3 Clamping screw for condenser
4 Condenser height adjuster

Fig. 6
Underside of condenser
1 Orientation pin

Condenser holder

1 Guiding notch

1

2 3

4

1

1

Condenser connector

1 Condenser cable socket

1

Note:
The condenser must be centered before using
the microscope.

→

     

Köhler illumination p. 37.