User ManualTable of ContentsMaster Install Guide1FOR DISTRIBUTION TO AUTHORIZED1COMPUSTAR DEALERS ONLY104/27/0611WFM6R8Dipswitch and Jumper Settings13Alternator sensing:15CONNECTOR 120CONNECTOR 221CONNECTOR 321CONNECTOR 422CONNECTOR 523CONNECTOR 623(Pre-wired L.E.D.)23CONNECTOR 724(Pre-wired Shock Sensor)24CONNECTOR 824(Optional add on sensors; i.e. proximity)24CONNECTOR 924(Pre-wired Remote Paging Sensor or R.P.S.)24CONNECTOR 1024(Optional Temperature sensor)24CONNECTOR 1125(Pre-wired Antenna Cable)25CONNECTOR 128CONNECTOR 228CONNECTOR 329CONNECTOR 430CONNECTOR 530(Pre-wired L.E.D.)30CONNECTOR 630(Pre-wired Shock Sensor)30CONNECTOR 731(Pre-wired Remote Paging Sensor or R.P.S.)31CONNECTOR 831(Pre-wired Antenna Cable)31CONNECTOR 134CONNECTOR 235CONNECTOR 335CONNECTOR 436CONNECTOR 537(Optional Temperature sensor)37CONNECTOR 637(Pre-wired Antenna Cable)37CONNECTOR 737RS 23237CONNECTOR 140CONNECTOR 240CONNECTOR 341CONNECTOR 442(Pre-wired L.E.D.)42CONNECTOR 542(Pre-wired Shock Sensor)42Resetting all of Menu #1 or Menu #248Options Explained In Detail CM3000-3300-420055Additional Programming59Common Diagrams65Note: This diagram will not work with all turbo timers.70Starter Kill Relay Installation71Adding a Relay to Power a Secondary72Ignition, Accessory, or Starter72Adding Aftermarket Alarm Accessories73Using the Ground While Armed Output73Accessory Manuals75OP500 Option Programmer77Note1: The USB interface cable is for future use to connect the OP500 to a computer. Once the software for this feature is complete, additional instructions will be supplied.77Channel Expander78The channel expander is an add-on module that can be used to expand the existing two auxiliary outputs to a total of seven auxiliary outputs. Each one of these seven outputs can be individually programmed for pulsed, latched, or timed-latch output. The programming of the Channel Expander outputs must be done with the Option Programmer; the CompuStar remotes do not have the ability to access these programming options.78Please note that the Auxiliary outputs are low-level outputs, and should not79Programming the Outputs79RPS – Remote Paging Sensor79Temperature Sensor79Size: 898 KBPages: 80Language: EnglishOpen manual