Quantum 10K II User Manuals

Table of Contents

• 1.1 AUDIENCE

  1
• 1.2 DOCUMENT ORGANIZATION

  1
• 1.3 TERMINOLOGY AND CONVENTIONS

  1
• 1.4 REFERENCES

  1
• 2.1 PRODUCT OVERVIEW

  2
• 2.2 KEY FEATURES

  2
• 2.3 STANDARDS AND REGULATIONS

  2
• 2.4 HARDWARE REQUIREMENTS

  2
• 3.1 SAFETY, HANDLING, & ELECTROSTATIC DISCHARGE PROTECTION

  3
• 3.1.1 Safety Precautions

  3
• 3.1.2 Handling

  3
• 3.1.3 Electrostatic Discharge (ESD) Protection

  3
• 3.2 SPACE REQUIREMENTS

  3
• 3.3 UNPACKING INSTRUCTIONS

  3
• 3.4 CONFIGURATION JUMPERS AND CONNECTIONS

  3
• 3.4.1 Jumper Configurations and Connections – Disk Drives with 68-Pin SCSI Connector

  3
• 3.4.1.1 TERMPWR (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.1.2 SCSI ID (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.1.3 Write Protection (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.1.4 Spin Up (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.1.5 Enable Narrow Mode (Force 8) (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.1.6 Remote Busy and Fault Displays (Disk Drives with 68-Pin SCSI Connector)

  3
• 3.4.2 Jumper Configurations and Connections for SCA-2 Connector Versions

  3
• 3.4.2.1 Termination for SCA-2 Connector Versions

  3
• 3.4.2.2 SCSI ID for SCA-2 Connector Versions

  3
• 3.4.2.3 Spin Up for SCA-2 Connector Versions

  3
• 3.4.2.4 Activity LED for SCA-2 Connector Versions

  3
• 3.4.2.5 Force Single-Ended Operation for SCA-2 Connector Versions

  3
• 3.5 CONNECTOR PINOUTS AND WIRING DIAGRAMS

  3
• 3.5.1 Atlas 10K II Ultra 160/m SCSI Disk Drive with 68-Pin SCSI Connector

  3
• 3.5.2 Atlas 10K II Ultra 160/m SCSI Disk Drive with 80-Pin, SCA-2 SCSI Connector

  3
• 3.6 DRIVE MOUNTING AND INSTALLATION

  3
• 3.6.1 Orientation

  3
• 3.6.2 Mounting Screw Clearance

  3
• 3.6.3 Shock Clip

  3
• 3.6.4 Mounting

  3
• 3.6.5 Ventilation

  3
• 3.6.6 Installation in a 3.5-inch Bay

  3
• 3.6.7 Installation in a 5.25-inch Bay

  3
• 3.6.8 Backplane Installation (SCA Drive)

  3
• 3.6.9 Drive Connections

  3
• 3.6.9.1 SCSI Bus Connection

  3
• 3.6.9.2 Power Connection

  3
• 3.6.9.3 Cables

  3
• 4.1 SPECIFICATION SUMMARY

  4
• 4.2 FORMATTED CAPACITY

  4
• 4.3 DATA TRANSFER RATES

  4
• 4.4 TIMING SPECIFICATIONS

  4
• 4.5 POWER

  4
• 4.5.1 Power Sequencing

  4
• 4.5.2 Power Reset Limits

  4
• 4.5.3 Power Requirements

  4
• 4.5.3.1 Power Consumption

  4
• 4.5.3.2 DC Voltage Tolerances

  4
• 4.5.3.3 Current Requirements

  4
• 4.5.3.4 Current Transients

  4
• 4.5.3.5 Supply Ripple Voltage and Noise

  4
• 4.5.3.6 DC Voltage Monitoring

  4
• 4.6 ACOUSTICS

  4
• 4.7 MECHANICAL

  4
• 4.8 ENVIRONMENTAL CONDITIONS

  4
• 4.9 SHOCK AND VIBRATION

  4
• 4.10 RELIABILITY

  4
• 5.1 Overview of the SCSI Command Descriptions

  5
• 5.2 Command Descriptor Block

  5
• 5.3 Status/Error Reporting

  5
• 5.4 Auto Contingent Allegiance Condition and Contingent Allegiance Condition

  5
• 5.5 Extended Contingent Allegiance Condition

  5
• 5.6 Linked Commands

  5
• 5.7 DATA Transfer Command Components

  5
• 5.8 SCSI Command Descriptions

  5
• 5.9 CHANGE DEFINITION Command (40h)

  5
• 5.10 FORMAT UNIT Command (04h)

  5
• 5.10.1 Five Forms of FORMAT UNIT Commands

  5
• 5.10.2 FORMAT UNIT Parameter List

  5
• 5.10.2.1 FORMAT UNIT Defect List Header

  5
• 5.10.2.2 FORMAT UNIT Defect Descriptor – Block Format

  5
• 5.10.2.3 FORMAT UNIT Defect Descriptor – Physical Sector and Byte From Index Format

  5
• 5.10.2.4 FORMAT UNIT Initialization Pattern Descriptor

  5
• 5.11 INQUIRY Command (12h)

  5
• 5.11.1 Standard Inquiry Data Page

  5
• 5.11.2 Vital Product Data Pages

  5
• 5.11.2.1 Supported Vital Product Data Pages Page (00h)

  5
• 5.11.2.2 Unit Serial Number Page (80h)

  5
• 5.11.2.3 Implemented Operating Definition Page (81h)

  5
• 5.11.2.4 ASCII Implemented Operating Definition Page (82h)

  5
• 5.11.2.5 Device Identification Page (83h)

  5
• 5.11.2.6 Firmware Revision Page (C0h)

  5
• 5.11.2.7 Quantum Manufacturing Information Page (C1h)

  5
• 5.11.2.8 Negotiated Rate Page (C4h)

  5
• 5.11.2.9 Command Support Data Pages

  5
• 5.12 LOG SELECT Command (4Ch)

  5
• 5.13 LOG SENSE Command (4Dh)

  5
• 5.13.1 LOG SENSE Command Descriptor Block

  5
• 5.13.2 LOG SENSE Log Pages

  5
• 5.14 MODE SELECT (6) Command (15h)

  5
• 5.14.1 Initiator-Changeable Mode Pages

  5
• 5.14.2 Mode Page Types

  5
• 5.14.3 Mode Parameter List

  5
• 5.14.3.1 Categories of Changeable Pages

  5
• 5.14.3.2 Unit Attention Condition Page (00h)

  5
• 5.14.3.3 Read-Write Error Recovery Page (01h)

  5
• 5.14.3.4 Disconnect-Reconnect Page (02h)

  5
• 5.14.3.5 Verify Error Recovery Page (07h)

  5
• 5.14.3.6 Caching Page (08h)

  5
• 5.14.3.7 Control Mode Page (0Ah)

  5
• 5.14.3.8 Notch and Partition Page (0Ch)

  5
• 5.14.3.9 XOR Control Mode Page (10h)

  5
• 5.14.3.10 Power Condition Page (1Ah)

  5
• 5.14.3.11 Information Exceptions Control Page (1Ch)

  5
• 5.14.3.12 Quantum-Unique Page (39h)

  5
• 5.15 MODE SELECT (10) Command (55h)

  5
• 5.16 MODE SENSE (6) Command (1Ah)

  5
• 5.16.1 Read-Only Mode Pages

  5
• 5.16.2 Format Device Page (03h)

  5
• 5.16.3 Rigid Disk Geometry Page (04h)

  5
• 5.16.4 Vendor-Unique Caching Page (38h)

  5
• 5.17 MODE SENSE (10) Command (5Ah)

  5
• 5.18 PERSISTENT RESERVATION IN Command (5Eh)

  5
• 5.19 PERSISTENT RESERVATION OUT Command (5Fh)

  5
• 5.20 READ (6) Command (08h)

  5
• 5.21 READ (10) Command (28h)

  5
• 5.22 READ BUFFER Command (3Ch)

  5
• 5.23 READ CAPACITY Command (25h)

  5
• 5.24 READ DEFECT DATA (10) Command (37h)

  5
• 5.25 READ DEFECT DATA (12) Command (B7h)

  5
• 5.26 READ LONG Command (3Eh)

  5
• 5.27 READ SKIP MASK Command (E8h)

  5
• 5.28 REASSIGN BLOCKS Command (07h)

  5
• 5.29 RECEIVE DIAGNOSTIC RESULTS Command(1Ch)

  5
• 5.29.1 Supported Diagnostics Pages Page (00h)

  5
• 5.29.2 Translate Address Page (40h)

  5
• 5.30 RELEASE (6) Command (17h)

  5
• 5.31 RELEASE (10) Command (57h)

  5
• 5.32 REPORT DEVICE IDENTIFIER Command

  5
• 5.33 REPORT LUNS Command (0Ah)

  5
• 5.34 REQUEST SENSE Command (03h)

  5
• 5.34.1 Sense Data Availability

  5
• 5.34.2 Clearing Sense Data

  5
• 5.34.3 Status Reporting

  5
• 5.34.4 Sense Data Format for Error Code 70h and Error Code 71h

  5
• 5.35 RESERVE (6) Command (16h)

  5
• 5.36 RESERVE (10) Command (56h)

  5
• 5.37 REZERO UNIT Command (01h)

  5
• 5.38 SEEK (6) Command (0Bh)

  5
• 5.39 SEEK (10) Command (2Bh)

  5
• 5.40 SEND DIAGNOSTIC Command (1Dh)

  5
• 5.40.1 Supported Diagnostic Page List

  5
• 5.40.2 Translate Address Page

  5
• 5.41 SET DEVICE IDENTIFIER Command

  5
• 5.42 START STOP UNIT Command (1Bh)

  5
• 5.43 SYNCHRONIZE CACHE Command (35h)

  5
• 5.44 TEST UNIT READY Command (00h)

  5
• 5.45 VERIFY Command (2Fh)

  5
• 5.46 WRITE (6) Command (0Ah)

  5
• 5.47 WRITE (10) Command (2Ah)

  5
• 5.48 WRITE AND VERIFY Command (2Eh)

  5
• 5.49 WRITE BUFFER Command (3Bh)

  5
• 5.50 WRITE LONG Command (3Fh)

  5
• 5.51 WRITE SAME Command (41h)

  5
• 5.52 WRITE SKIP MASK Command (EAh)

  5
• 5.53 XDREAD (10) Command (52h)

  5
• 5.54 XDWRITE (10) Command (50h)

  5
• 5.55 XPWRITE (10) Command (51h)

  5
• 6.1 Key Features

  6
• 6.2 Prefetch

  6
• 6.3 Write-Back Caching

  6
• 6.4 Zero Latency READ/WRITE

  6
• 6.5 Disconnect-Reconnect

  6
• 6.6 Track and Cylinder Skewing

  6
• 6.7 Average Access Time

  6
• 6.8 Embedded Servo System

  6
• 6.9 Data Integrity and Security

  6
• 6.9.1 Media Error Protection

  6
• 6.9.2 Transfer Error Protection

  6
• 6.9.3 Addressing Error Protection

  6
• 6.9.4 Data Sector Reallocation Error Protection

  6
• 6.9.5 Data Verification

  6
• 6.10 Tagged Command Queuing

  6
• 6.11 Command Reordering

  6
• 6.12 Banded Recording

  6
• 6.13 Special Functions

  6
• 6.14 Power Management

  6
• 6.15 Diagnostics

  6
• 6.15.1 Power Up Self Test (POST)

  6
• 6.15.2 Periodic Self-Adjustments

  6
• 6.15.3 Host Diagnostics

  6
• 6.15.4 Log Sense

  6
• 6.16 Error Recovery

  6
• 6.16.1 Seek Error Recovery

  6
• 6.16.2 Data Read Errors

  6
• 6.16.3 Reallocation of Bad Blocks

  6
• 6.17 The Ultra 160/m Low Voltage Differential (LVD) SCSI Interface

  6
• 6.17.1 Diffsens

  6
• 6.17.2 Diffsens Switching

  6
• 6.17.3 DT and ST Clocking

  6
• 6.17.4 Cyclic Redundancy Checking

  6
• 6.17.5 Domain Validation

  6
• 6.18 Hot Plugging/Removal Insertion of SCSI Devices

  6
• (9.1/18.2 GB Models)

  3
• (9.1/18.2 GB Models)

  3
• 3-3 Drive Packing Assembly

  3
• 3-4 Jumper and Connector Locations, 68-Pin SCSI Connector Version

  3
• 3-5 Pin Locations on SCA-2 Connector

  3
• 3-6 Force Single-Ended Operation Jumper Locations

  3
• 3-7 Connectors on 68-Pin SCSI Connector Versions of Atlas 10K II Ultra 160/m Hard Disk Drives

  3
• 3-8 SCA-2 Connector on Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drive

  3
• 3-9 Mounting Dimensions for the 68-pin Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drive

  3
• 3-11 Mounting Screw Clearance for the Quantum Atlas 10K II Ultras 160/m SCSI Hard Disk Drive

  3
• 3-12 Lengthwise Airflow Cooling

  3
• 3-13 Widthwise Airflow Cooling

  3
• 3-14 Brackets for 5.25-inch Bay

  3
• 3-15 Drive Power Connector J2

  3
• Typical (6-Byte) Command Descriptor Block — Data Format

  5
• Command Descriptor Block Control Field — Data Format

  5
• CHANGE DEFINITION Command Descriptor Block — Data Format

  5
• FORMAT UNIT Command Descriptor Block — Data Format

  5
• FORMAT UNIT Parameter List — Data Format

  5
• FORMAT UNIT Defect List Header — Data Format

  5
• FORMAT UNIT Defect Descriptor — Block Format

  5
• Format

  5
• FORMAT UNIT Initialization Pattern Descriptor — Data Format

  5
• 5-10 INQUIRY Command Descriptor Block — Data Format

  5
• 5-11 Standard Inquiry Data Page — Data Format

  5
• 5-12 Supported Vital Product Data Pages Page — Data Format

  5
• 5-13 Unit Serial Number Page — Data Format

  5
• 5-14 Implemented Operating Definition Page — Data Format

  5
• 5-15 ASCII Implemented Operating Definition Page — Data Format

  5
• 5-16 Device Identification Page — Data Format

  5
• 5-17 Firmware Revision Page — Data Format

  5
• 5-18 Quantum Manufacturing Information Page — Data Format

  5
• 5-18A Negotiated Rate Information Page — Data Format

  5
• 5-19 Command Support Data Page — Data Format

  5
• 5-20 LOG SELECT Command Descriptor Block — Data Format

  5
• 5-21 LOG SENSE Command Descriptor Block — Data Format

  5
• 5-22 LOG SENSE Log Page Format − Data Format

  5
• 5-23 Generic Log Parameter − Data Format

  5
• 5-24 MODE SELECT (6) Command Descriptor Block — Data Format

  5
• 5-25 Mode Parameter List — Data Format

  5
• 5-26 Mode Parameter Header (6-Byte) — Data Format

  5
• 5-27 Mode Parameter Block Descriptor — Data Format

  5
• 5-28 Unit Attention Condition Page — Data Format

  5
• 5-29 Read-Write Error Recovery Page — Data Format

  5
• 5-30 Disconnect-Reconnect Page — Data Format

  5
• 5-31 Verify Error Recovery Page — Data Format

  5
• 5-32 Caching Page — Data Format

  5
• 5-33 Control Mode Page — Data Format

  5
• 5-34 Notch and Partition Page — Data Format

  5
• 5-35 XOR Control Mode Page — Data Format

  5
• Power Condition Page — Data Format

  5
• Information Exceptions Control Page — Data Format

  5
• Quantum-Unique Page — Data Format

  5
• MODE SELECT (10) Command Descriptor Block - Data Format

  5
• Mode Parameter Header (10-Byte) — Data Format

  5
• Mode Parameter Block Descriptor – Data Format

  5
• MODE SENSE (6) Command Descriptor Block — Data Format

  5
• Mode Parameter Header (6 Byte) — Data Format

  5
• Format Device Page — Data Format

  5
• Rigid Disk Geometry Page — Data Format

  5
• Vendor-Unique Caching Page — Data Format

  5
• MODE SENSE (10) Command Descriptor Block - Data Format

  5
• Mode Parameter Header (10 Byte) — Data Format

  5
• Mode Parameter Block Descriptor – Data Format

  5
• PERSISTENT RESERVATION IN Command - Data Format

  5
• Read Keys Parameters - Data Format

  5
• Read Reservations Parameters - Data Format

  5
• PERSISTENT RESERVATION IN Read Reservations Descriptor - Data Format

  5
• PERSISTENT RESERVATION OUT Command - Data Format

  5
• PERSISTENT RESERVATION OUT Parameter List - Data Format

  5
• READ (6) Command - Data Format

  5
• READ (10) Command — Data Format

  5
• READ BUFFER Command — Data Format

  5
• READ CAPACITY Command — Data Format

  5
• READ CAPACITY Returned Data — Data Format

  5
• READ DEFECT DATA (10) Command — Data Format

  5
• Defect Descriptor — Block Format

  5
• Defect Descriptor — Bytes From Index Format or Physical Sector Format

  5
• Defect List Header — Data Format

  5
• READ DEFECT DATA (12) Command — Data Format

  5
• Defect Descriptor — Block Format

  5
• Defect Descriptor — Bytes From Index Format or Physical Sector Format

  5
• Defect List Header — Data Format

  5
• READ LONG Command Descriptor Block — Data Format

  5
• READ LONG Command — Returned Data

  5
• READ SKIP MASK Command Descriptor Block — Data Format

  5
• REASSIGN BLOCKS Command Descriptor Block — Data Format

  5
• REASSIGN BLOCKS Defect List Header — Data Format

  5
• REASSIGN BLOCKS Defect Descriptor — Data Format

  5
• RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block — Data Format

  5
• Supported Diagnostic Pages Page — Data Format

  5
• Translate Address Page — Data Format

  5
• RELEASE (6) Command Descriptor Block — Data Format

  5
• RELEASE (10) Command Descriptor Block — Data Format

  5
• REPORT DEVICE IDENTIFIER Command Descriptor Block — Data Format

  5
• REPORT DEVICE IDENTIFIER Parameter List — Data Format

  5
• REPORT LUNS Command Descriptor Block — Data Format

  5
• LUN Reporting Parameter List — Data Format

  5
• REQUEST SENSE Command Descriptor Block — Data Format

  5
• Sense Data Format for Error Code 70h — Data Format

  5
• ILLEGAL REQUEST Sense Key Field Pointer Bytes — Data Format

  5
• NOT READY Sense Key - Progress Indication Bytes — Data Format

  5
• Data Format

  5
• RESERVE (6) Command Descriptor Block — Data Format

  5
• RESERVE (10) Command Descriptor Block — Data Format

  5
• Extent Descriptors – Data Format

  5
• Parameter List When LongID and Extent Bits = 1 – Data Format

  5
• RESERVE (10) ID Only Parameter List – Data Format

  5
• REZERO UNIT Command Descriptor Block — Data Format

  5
• SEEK (6) Command Descriptor Block — Data Format

  5
• SEEK (10) Command Descriptor Block — Data Format

  5
• SEND DIAGNOSTIC Command Descriptor Block — Data Format

  5
• Supported Diagnostic Page List — Data Format

  5
• Translate Address Page — Data Format

  5
• SET DEVICE IDENTIFIER Command Descriptor Block — Data Format

  5
• SET DEVICE IDENTIFIER Parameter List — Data Format

  5
• START STOP UNIT Command Descriptor Block — Data Format

  5
• SYNCHRONIZE CACHE Command Descriptor Block — Data Format

  5
• TEST UNIT READY Command Descriptor Block — Data Format

  5
• VERIFY Command Descriptor Block — Data Format

  5
• WRITE (6) Command Descriptor Block — Data Format

  5
• WRITE (10) Command Descriptor Block — Data Format

  5
• WRITE AND VERIFY Command Descriptor Block — Data Format

  5
• WRITE BUFFER Command Descriptor Block — Data Format

  5
• WRITE LONG Command Descriptor Block — Data Format

  5
• WRITE SAME Command Descriptor Block — Data Format

  5
• WRITE SKIP MASK Command Descriptor Block — Data Format

  5
• XDREAD (10) Command Descriptor Block — Data Format

  5
• XDWRITE (10) Command Descriptor Block — Data Format

  5
• XPWRITE (10) Command Descriptor Block — Data Format

  5
• ST Clocking and DT Clocking

  6
• SCSI ID Selection on Option Connector (68-Pin SCSI Connector Drives)

  3
• Jumper Settings for SCSI ID, 28-Pin Secondary Option Connector

  3
• SCSI-ID Pin Assignments (SCA-2 Connector Versions of the Disk Drive)

  3
• Spin Up on Power On Options

  3
• 68-Pin Wide (LVD) SCSI Connector Pin Assignments

  3
• 80-Pin SCA-2 SCSI Connector Pin Assignments

  3
• Connectors and Jumpers

  3
• Specifications

  4
• Formatted Capacity

  4
• Transfer Rates

  4
• Timing Specifications

  4
• Power Reset Limits

  4
• Acoustical Characteristics

  4
• Environmental Specifications

  4
• Shock and Vibration Specifications

  4
• Supported SCSI Messages

  5
• Command Descriptor Block — Field Descriptions

  5
• Command Descriptor Block Control Field — Field Descriptions

  5
• Status Codes

  5
• DATA-Phase Command Contents

  5
• CHANGE DEFINITION — Field Descriptions

  5
• FORMAT UNIT Command – Field Descriptions

  5
• FORMAT UNIT Command Supported Options

  5
• FORMAT UNIT Defect List Header — Field Descriptions

  5
• FORMAT UNIT Initialization Pattern Descriptor — Field Descriptions

  5
• FORMAT UNIT Initialization Pattern Type

  5
• INQUIRY Command Descriptor Block — Field Descriptions

  5
• Standard Inquiry Data Page — Field Descriptions

  5
• Vital Product Data — Page Codes

  5
• Unit Serial Number Page — Field Descriptions

  5
• Implemented Operating Definition Page — Field Descriptions

  5
• Device Identification Page — Field Descriptions

  5
• Negotiated Rate Information Page — Field Descriptions

  5
• Command Support Data Page — Field Descriptions

  5
• Command Support Data Page Command or Operation Codes

  5
• LOG SELECT Command Descriptor Block — Field Descriptions

  5
• Disk Drive Log Pages

  5
• LOG SENSE Command Descriptor Block — Field Descriptions

  5
• LOG SENSE Log Page Format − Field Descriptions

  5
• Generic Log Parameter − Field Descriptions

  5
• MODE SELECT (6) Command — Field Descriptions

  5
• Initiator-Changeable Mode Pages

  5
• Mode Page Types

  5
• Mode Parameter List — Field Descriptions

  5
• Mode Parameter Header — Field Descriptions

  5
• Mode Parameter Block Descriptor — Field Descriptions

  5
• Categories Of Changeable Pages

  5
• Unit Attention Condition Page — Field Descriptions

  5
• Read-Write Error Recovery Page — Field Descriptions

  5
• Disconnect-Reconnect Page — Field Descriptions

  5
• Verify Error Recovery Page — Field Descriptions

  5
• Caching Page — Field Descriptions

  5
• Control Mode Page — Field Descriptions

  5
• Notch and Partition Page — Field Descriptions

  5
• XOR Control Page - Field Descriptions

  5
• Power Condition Page — Field Descriptions

  5
• Information Exceptions Control Page — Field Descriptions

  5
• Codes Used by the MRIE Field

  5
• Quantum Unique Page — Field Descriptions

  5
• Mode Parameter Block Descriptor – Field Descriptions

  5
• MODE SENSE Command — Field Descriptions

  5
• Mode Parameter Header — Field Descriptions

  5
• Read-Only Mode Pages

  5
• Format Device Page — Field Descriptions

  5
• Rigid Disk Geometry Page — Field Description

  5
• Vendor-Unique Caching — Field Description

  5
• Mode Parameter Block Descriptor – Field Descriptions

  5
• PERSISTENT RESERVATION IN Command — Field Descriptions

  5
• Read Keys Parameters — Field Descriptions

  5
• Read Reservations Parameters — Field Descriptions

  5
• — Field Descriptions

  5
• Persistent Reservation Type Codes and Their Meanings

  5
• Reservations Exist?

  5
• PERSISTENT RESERVATION OUT Command — Field Descriptions

  5
• PERSISTENT RESERVATION OUT Command’s Service Action Descriptors

  5
• Persistent Reservation Type Codes and Their Meanings

  5
• PERSISTENT RESERVATION OUT Parameter List – Field Descriptors

  5
• Device Server Interpretation of Service and Scope Value

  5
• READ (6) Command — Field Descriptions

  5
• READ (10) Command — Field Descriptions

  5
• READ BUFFER Command — Field Descriptions

  5
• READ CAPACITY Command — Field Descriptions

  5
• READ DEFECT DATA (10)Command — Field Descriptions

  5
• Defect List Header — Field Descriptions

  5
• READ DEFECT DATA (12)Command — Field Descriptions

  5
• Defect List Header — Field Descriptions

  5
• READ LONG Command Descriptor Block — Field Descriptions

  5
• READ SKIP MASK — Field Description

  5
• REASSIGN BLOCKS Defect List Header — Field Descriptions

  5
• Diagnostic Pages Supported by the Drives

  5
• RECEIVE DIAGNOSTIC RESULTS Command Descriptor Block — Field Descriptions

  5
• Source Descriptor — Field Descriptions

  5
• RELEASE (6) Command Descriptor Block — Field Descriptions

  5
• RELEASE (10) Command Descriptor Block — Field Descriptions

  5
• REPORT DEVICE IDENTIFIER Command Descriptor Block — Field Descriptions

  5
• REPORT DEVICE IDENTIFIER Parameter List — Field Descriptions

  5
• REPORT LUNS Command Descriptor Block — Field Descriptions

  5
• REQUEST SENSE Command Descriptor Block — Field Descriptions

  5
• Sense Data Fields (Error Code 70h) — Field Descriptions

  5
• Supported Sense Keys

  5
• Sense Key Information Field Contents

  5
• Supported Additional Sense Codes and Qualifiers (in Hex)

  5
• Sense-Key Specific Field Contents

  5
• Field Descriptions

  5
• Field Descriptions

  5
• Field Descriptions

  5
• RESERVE (6) Command — Field Descriptions

  5
• RESERVE (10) Command — Field Descriptions

  5
• Reservation Types

  5
• SEND DIAGNOSTIC Command — Field Descriptions

  5
• SET DEVICE IDENTIFIER Command Descriptor Block — Field Descriptions

  5
• SET DEVICE IDENTIFIER Parameter List

  5
• START STOP UNIT Command — Field Descriptions

  5
• SYNCHRONIZE CACHE Command — Field Descriptions

  5
• VERIFY Command — Field Descriptions

  5
• WRITE (6) Command — Field Descriptions

  5
• WRITE (10) Command — Field Descriptions

  5
• WRITE AND VERIFY Command — Field Descriptions

  5
• WRITE BUFFER Command — Field Descriptions

  5
• WRITE LONG Command — Field Descriptions

  5
• WRITE SAME Command — Field Descriptions

  5
• WRITE SKIP MASK Command — Field Descriptions

  5
• XDREAD (10) Command — Field Descriptions

  5
• XDWRITE (10) Command — Field Descriptions

  5
• XPWRITE (10) Command — Field Descriptions

  5