Renesas M306H2T-RPD-E User Manuals

Table of Contents

• Preface

  3
• Contents

  4
• 1. Precautions for Safety

  7
  • 1.1 Safety Symbols and Meanings

    9
• 2. Preparation

  21
  • 2.1 Terminology

    22
  • 2.2 Package Components

    23
  • 2.3 Other Tool Products Required for Development

    23
  • 2.4 Name of Each Part

    24
    • (1) System Configuration

      24
    • (2) Inside of the Emulation Pod

      25
  • 2.5 When Using the Emulator for the First Time

    26
• 3. Setting Up

  27
  • 3.1 Removing the Upper Cover

    28
  • 3.2 Setting Switches and Pullup Resistors

    29
  • 3.3 Selecting Clock Supply

    35
    • (1) Using the Oscillator Circuit on the Target System

      36
    • (2) Changing the Internal Oscillator Circuit of the Emulation Pod

      37
    • (3) Replacing the Oscillator Circuit Boards

      38
  • 3.4 A-D Conversion Bypass Capacitor

    39
  • 3.5 Data Slicer I/O Signal and FSC Clock I/O Signal Circuit

    40
  • 3.6 Connecting the PC4701

    41
    • (1) Connecting the Cable to the PC4701

      41
    • (2) Connecting the Cable to the Emulation Pod

      42
  • 3.7 Connecting the Target System

    43
  • 3.8 Making an MCU File for PD30

    44
• 4. Usage

  45
  • 4.1 Turning On the Power

    46
    • (1) Checking the Connection of the Emulator System

      46
    • (2) Turning On the Power

      46
    • (3) LED Display When PC4701 Starts Up Normally

      47
  • 4.2 Downloading Firmware

    48
    • (1) When It is Necessary to Download Firmware

      48
    • (2) Downloading Firmware in the Maintenance Mode

      48
  • 4.3 Self-checks

    49
    • (1) Self-check Procedure

      49
    • (2) If an Error is Detected in Self-checks

      49
• 5. Specifications

  51
  • 5.1 Specifications

    52
  • 5.2 Operation Timing in the Memory Expansion and Microprocessor Modes (5 V)

    53
    • (1) Separate Bus, No-Wait

      53
    • (2) Separate Bus, With Wait, Accessing External Memory Area

      55
    • (3) Multiplex Bus, With Wait, Accessing External Memory Area

      57
    • (4) Timing Requirements

      59
  • 5.3 Electrical Characteristics

    61
  • 5.4 Connection Diagram

    62
  • 5.5 External Dimensions

    63
    • (1) External Dimensions of the Emulation Pod

      63
    • (2) External Dimensions of the Pitch Converter Board (FLX160-PRB)

      64
    • (3) External Dimensions of the Pitch Converter Board (M306H2T-PTC)

      64
• 6. Troubleshooting

  65
  • 6.1 Flowchart to Remedy the Troubles

    66
  • 6.2 When the Emulator Debugger Does Not Start Up Properly

    67
    • (1) When the LED Display of the PC4701 is Abnormal

      67
    • (2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)

      68
    • (3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)

      69
  • 6.3 Operation Differs from That of Actual MCUs

    70
    • (1) Cannot Reset from the Target System

      70
    • (2) Data Values of RAM Area at Power-on are Different

      70
    • (3) HOLD* Control

      70
    • (4) A-D Conversion Values are Different from Expected Values

      70
    • (5) Outputs of ALE, Address and Others are Different from Those of Actual MCUs

      70
• 7. Maintenance and Guarantee

  71
  • 7.1 Maintenance

    72
  • 7.2 Guarantee

    72
  • 7.3 Repair Provisions

    72
  • 7.4 How to Request for Repair

    73