Manuel D’UtilisationTable des matièresPreface3Contents41. Precautions for Safety71.1 Safety Symbols and Meanings92. Preparation212.1 Terminology222.2 Package Components232.3 Other Tool Products Required for Development232.4 Name of Each Part24(1) System Configuration24(2) Inside of the Emulation Pod252.5 When Using the Emulator for the First Time263. Setting Up273.1 Removing the Upper Cover283.2 Setting Switches and Pullup Resistors293.3 Selecting Clock Supply35(1) Using the Oscillator Circuit on the Target System36(2) Changing the Internal Oscillator Circuit of the Emulation Pod37(3) Replacing the Oscillator Circuit Boards383.4 A-D Conversion Bypass Capacitor393.5 Data Slicer I/O Signal and FSC Clock I/O Signal Circuit403.6 Connecting the PC470141(1) Connecting the Cable to the PC470141(2) Connecting the Cable to the Emulation Pod423.7 Connecting the Target System433.8 Making an MCU File for PD30444. Usage454.1 Turning On the Power46(1) Checking the Connection of the Emulator System46(2) Turning On the Power46(3) LED Display When PC4701 Starts Up Normally474.2 Downloading Firmware48(1) When It is Necessary to Download Firmware48(2) Downloading Firmware in the Maintenance Mode484.3 Self-checks49(1) Self-check Procedure49(2) If an Error is Detected in Self-checks495. Specifications515.1 Specifications525.2 Operation Timing in the Memory Expansion and Microprocessor Modes (5 V)53(1) Separate Bus, No-Wait53(2) Separate Bus, With Wait, Accessing External Memory Area55(3) Multiplex Bus, With Wait, Accessing External Memory Area57(4) Timing Requirements595.3 Electrical Characteristics615.4 Connection Diagram625.5 External Dimensions63(1) External Dimensions of the Emulation Pod63(2) External Dimensions of the Pitch Converter Board (FLX160-PRB)64(3) External Dimensions of the Pitch Converter Board (M306H2T-PTC)646. Troubleshooting656.1 Flowchart to Remedy the Troubles666.2 When the Emulator Debugger Does Not Start Up Properly67(1) When the LED Display of the PC4701 is Abnormal67(2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)68(3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)696.3 Operation Differs from That of Actual MCUs70(1) Cannot Reset from the Target System70(2) Data Values of RAM Area at Power-on are Different70(3) HOLD* Control70(4) A-D Conversion Values are Different from Expected Values70(5) Outputs of ALE, Address and Others are Different from Those of Actual MCUs707. Maintenance and Guarantee717.1 Maintenance727.2 Guarantee727.3 Repair Provisions727.4 How to Request for Repair73Taille: 730 koPages: 76Language: EnglishOuvrir le manuel