User ManualTable of ContentsPreface3Contents41. Precautions for Safety71.1 Safety Symbols and Meanings82. Preparation132.1 Terminology142.2 Package Components152.3 Other Tool Products Required for Development152.4 Name of Each Part16(1) System Configuration16(2) Inside of Emulation Pod172.5 When Using the Emulator for the First Time183. Setting Up193.1 Selecting Clock Supply20(1) Using the Oscillator Circuit on the Target System21(2) Changing the Internal Oscillator Circuit of Emulation Pod22(3) Replacing the Oscillator Circuit Boards233.2 Connecting the Pod Probe and Emulation Pod243.3 Connecting the PC4701 and Emulation Pod26(1) Connecting the Cable to the PC470126(2) Connecting the Cable to the Emulation Pod274. Usage294.1 Turning on Power30(1) Checking the Connection of the System30(2) Turning on Power30(3) LED Display When PC4701 Starts up Normally314.2 Downloading Firmware32(1) When It is Necessary to Download Firmware32(2) Downloading Firmware in Maintenance Mode324.3 Starting Up the Emulator Debugger (Setting EMEM Dialog)33(1) Processor Mode33(2) Emem Address33(3) ROM Address33(4) DMA Address33(5) 8-bit bus mode Address33(6) Map Address334.4 Self-check34(1) Self-check Procedure34(2) If an Error is Detected in the Self-check345. Specifications375.1 Specifications385.2 External Dimensions of Emulation Pod396. Troubleshooting416.1 Flowchart to Remedy the Troubles426.2 When the Emulator Debugger Does Not Start Up Properly43(1) When the LED Display of PC4701 is Abnormal43(2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)44(3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)456.3 Operation Differs from that of MCUs with Flash Memory467. Maintenance and Guarantee477.1 Maintenance487.2 Guarantee487.3 Repair Provisions487.4 How to Request for Repair49Size: 673 KBPages: 52Language: EnglishOpen manual