Manuels d'utilisation pour Renesas M37900T2-RPD-E

Table des matières

• Preface

  3
• Contents

  4
• 1. Precautions for Safety

  7
  • 1.1 Safety Symbols and Meanings

    8
• 2. Preparation

  13
  • 2.1 Terminology

    14
  • 2.2 Package Components

    15
  • 2.3 Other Tool Products Required for Development

    15
  • 2.4 Name of Each Part

    16
    • (1) System Configuration

      16
    • (2) Inside of Emulation Pod

      17
  • 2.5 When Using the Emulator for the First Time

    18
• 3. Setting Up

  19
  • 3.1 Selecting Clock Supply

    20
    • (1) Using the Oscillator Circuit on the Target System

      21
    • (2) Changing the Internal Oscillator Circuit of Emulation Pod

      22
    • (3) Replacing the Oscillator Circuit Boards

      23
  • 3.2 Connecting the Pod Probe and Emulation Pod

    24
  • 3.3 Connecting the PC4701 and Emulation Pod

    26
    • (1) Connecting the Cable to the PC4701

      26
    • (2) Connecting the Cable to the Emulation Pod

      27
• 4. Usage

  29
  • 4.1 Turning on Power

    30
    • (1) Checking the Connection of the System

      30
    • (2) Turning on Power

      30
    • (3) LED Display When PC4701 Starts up Normally

      31
  • 4.2 Downloading Firmware

    32
    • (1) When It is Necessary to Download Firmware

      32
    • (2) Downloading Firmware in Maintenance Mode

      32
  • 4.3 Starting Up the Emulator Debugger (Setting EMEM Dialog)

    33
    • (1) Processor Mode

      33
    • (2) Emem Address

      33
    • (3) ROM Address

      33
    • (4) DMA Address

      33
    • (5) 8-bit bus mode Address

      33
    • (6) Map Address

      33
  • 4.4 Self-check

    34
    • (1) Self-check Procedure

      34
    • (2) If an Error is Detected in the Self-check

      34
• 5. Specifications

  37
  • 5.1 Specifications

    38
  • 5.2 External Dimensions of Emulation Pod

    39
• 6. Troubleshooting

  41
  • 6.1 Flowchart to Remedy the Troubles

    42
  • 6.2 When the Emulator Debugger Does Not Start Up Properly

    43
    • (1) When the LED Display of PC4701 is Abnormal

      43
    • (2) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)

      44
    • (3) Errors Occur When the Emulator Debugger Starts Up (When the target system is not connected)

      45
  • 6.3 Operation Differs from that of MCUs with Flash Memory

    46
• 7. Maintenance and Guarantee

  47
  • 7.1 Maintenance

    48
  • 7.2 Guarantee

    48
  • 7.3 Repair Provisions

    48
  • 7.4 How to Request for Repair

    49