ATEN Technology VS1814T Manual De Usuario

VS1814T / VS1818T User Manual

10

Refer to the installation diagram (the numbers in the diagram correspond to the 
numbers of the steps) and do the following:

1. Use an HDMI Type A Male-to-Male cable to connect your computer or 

HDMI source device to the VS1814T / VS1818T’s HDMI Input port.

2. Use up to 4 (VS1814T) / 8 (VS1818T) Cat 5e cables to connect up to four 

/ eight HDMI Receiver units (i.e. VE812R) to the HDBaseT Out ports.

Note: The HDMI Receiver unit’s HDMI OUT port connects to the HDMI 

IN port on your video display device using an HDMI cable. Refer to 
your receiving device’s User Manual for more details.

3. (Optional) Use an HDMI Type A Male-to-Male cable to connect your 

local HDMI display device to the HDMI Output port.

4. Plug the power adapter that came with the VS1814T / VS1818T into an 

AC power source, then plug the power adapter cable into the splitter’s 
Power Jack

5. (Optional) To edit the VS1814T / VS1818T system settings, connect a 

hardware / software controller to the RS-232 port.