ATEN Technology VS1814T Manual De Usuario
VS1814T / VS1818T User Manual
12
EDID Mode Selection
The VS1814T / VS1818T offers an easy and flexible EDID Mode selection
method using the rear panel EDID Mode Switch.
method using the rear panel EDID Mode Switch.
Extended Display Identification Data (EDID) is a data format that contains a
display's basic information and is used to communicate with the video source/
system.
display's basic information and is used to communicate with the video source/
system.
Simply press the EDID Mode pushbutton to toggle between the Default and
other EDID Settings (0~7), as follows:
0 (Default) – EDID is set to the ATEN default configuration
1 (Port 1) – Implements the EDID of the connected display to Port 1, and
other EDID Settings (0~7), as follows:
0 (Default) – EDID is set to the ATEN default configuration
1 (Port 1) – Implements the EDID of the connected display to Port 1, and
passes it to the video source
2 (Auto) - Implements the EDID of all connected displays. The VS1814T
/ VS1818T uses the best resolution for all displays
3 (Learn) - Uses the EDID configuration acquired from the EDID
Learning process.
4 ~ 7- Reserved.
You can also select the EDID Mode using RS-232 commands. See RS-232
Commands, page 13 for details.
Commands, page 13 for details.
Installing the RS-232 Controller
In order to use the RS-232 serial interface to attach a high-end controller (such
as a PC) to the VS1814T / VS1818T, use a serial cable such as a modem cable.
The end connecting to the VS1814T / VS1818T should have a 9-pin male
connector. Connect this to the serial interface on the rear of the VS1814T /
VS1818T.
as a PC) to the VS1814T / VS1818T, use a serial cable such as a modem cable.
The end connecting to the VS1814T / VS1818T should have a 9-pin male
connector. Connect this to the serial interface on the rear of the VS1814T /
VS1818T.
See RS-232 Commands, page 13 for details.