Precor CW34871-101 Manual De Usuario

 

Attach the Bottle Holder/Accessory Tray 

1.  Locate the bottle holder/accessory tray. Snap the two pieces 

together and set them aside. 

Note: For this unit, the bottle holder/accessory tray attaches to the 
side of the front weight tower upright. 

2.  Place the bottle holder bracket upside down (curved side at the top) 

and attach it to the weight stack tower using: 

Two custom bolts 

Two lock washers 

Two flat washers 

Two 

³₈” - 16 low head bolts 

One 

³₁₆” hex key 

One 1" open-ended wrench 

Note: The custom bolts pass through the frame from the inside hole 
and align with the smaller hole on the outside of the frame. 

 

3.  Set the bottle holder/accessory tray on top of the bottle holder 

bracket and align it with the bracket screw holes. Attach it to the 
bracket using: 

Two #8

 - 32 machine screws 

Note: Attach screws firmly, but do not overtighten.