Precor CW34864-101 Manual De Usuario

 

1.  Position the lower back so that its tabbed end is at the top. 

Note: Do not tighten any of the screws until all four screws are 
attached. 

2.  Line up the two screw holes near the upper corners of the lower 

back with the corresponding holes in the weight stack frame. 

3.  Attach the upper corners of the lower back to the weight stack 

frame using: 

Two 

¹⁄₄”- 20 buttonhead screws 

4.  Attach the lower corners of the lower back using: 

Two 

¹⁄₄”- 20 buttonhead screws 

5.  Tighten all four screws using a 

⁵₃₂” hex key until snug. 

6.  Position the upper back so that its tabbed end is at the bottom and 

insert its tabs between the tabs at the upper edge of the lower back.