Precor CW34864-101 Manual De Usuario

 

Disassemble the Equipment 

This unit arrives fully assembled except for the shrouds and the bottle 
holder/accessory tray. In some cases, you may need to disassemble the 
unit before you move it.   

1.  Loosen the locking jam nut and unscrew the bolt in the center of the 

top weight cap using a 

³₄” open-end wrench. 

2.  Route the cable through the top of the weight tower and down to the 

lower 6” pulley. 

3.  Remove the shoulder bolt from the 6” pulley using a 

¹₄” hex key. 

4.  Unfasten the 6” pulley and unthread the cable. 

Note: Remove the pulley cable from the weight stack and keep it 
attached to the exercise station.