Philips MP60/70/80/90 Manual De Usuario
28 Using Timers
Timer Setup Pop-up Keys
286
Timer Types
There are four types of timer:
Basic
,
Enhanced
,
Cyclic
and
No Limit
. A
Basic
timer has
a single, defined run time and progress is shown in the progress bar. An
Enhanced
timer is like a
Basic
timer but the progress bar shows progress beyond the end of the run time. A
Cyclic
timer
is like a
Basic
timer but restarts automatically when the run time is expired. A
No Limit
timer has
no run time or progress bar and shows the time elapsed since the timer was started.
The type of timer is set in the monitor’s Configuration Mode and is associated with the timer label.
Timer Setup Pop-up Keys
When you open the
Timers
window and select a timer, the
Setup
window opens and a selection of
pop-up keys appear to let you activate and control the timers.
Setting Up Timers
The additional notification setting is made in the monitor’s Configuration Mode and is associated with
the timer label. The timer type, display color of the timer and whether a window automatically pops up
on expiry are also settings made in Configuration Mode for each timer label.
the timer label. The timer type, display color of the timer and whether a window automatically pops up
on expiry are also settings made in Configuration Mode for each timer label.
The remaining timer settings can be made in Monitoring Mode. If you change settings when a timer is
running it will not be stopped. The timer will continue to count but the new settings will be applied.
running it will not be stopped. The timer will continue to count but the new settings will be applied.
To display the Setup window for a timer,
♦
in the
Timers
window, select the required timer, or
♦
select a timer on the Main Screen then select
Setup Timers
Timer Label
You can select from a variety of specific labels, for example Tourniquet, Infusion, Documentation or
from four non-specific labels Timer A, B, C, D. When you assign a label to a timer, the monitor
automatically applies the associated configuration settings to this timer, but the timer continues
counting and is not reset.
from four non-specific labels Timer A, B, C, D. When you assign a label to a timer, the monitor
automatically applies the associated configuration settings to this timer, but the timer continues
counting and is not reset.
To select a label, in the
Timers
window:
1
Select the required timer to display the
Setup
window.
2
Select
Label
.
3
Select a specific or non-specific label from the list.
Pop-Up Keys
Selecting this pop-up key lets you....
Start
start the timer.
Stop
stop the timer, allowing either restarting after a pause (
Start
key) or clearing
(
Clear
key).
Clear
clear the timer, ending this timer episode.
Timers
return to the timer window showing all active timers