Philips MP60/70/80/90 사용자 설명서

다운로드
페이지 414
28 Using Timers
Timer Setup Pop-up Keys
286
Timer Types
There are four types of timer: 
Basic
Enhanced
Cyclic 
and 
No Limit
. A 
Basic
 timer has 
a single, defined run time and progress is shown in the progress bar. An 
Enhanced
 timer is like a 
Basic
 timer but the progress bar shows progress beyond the end of the run time. A 
Cyclic 
timer 
is like a 
Basic
 timer but restarts automatically when the run time is expired. A 
No Limit
 timer has 
no run time or progress bar and shows the time elapsed since the timer was started.
The type of timer is set in the monitor’s Configuration Mode and is associated with the timer label.
Timer Setup Pop-up Keys
When you open the 
Timers
 window and select a timer, the 
Setup
 window opens and a selection of 
pop-up keys appear to let you activate and control the timers.
Setting Up Timers
The additional notification setting is made in the monitor’s Configuration Mode and is associated with 
the timer label. The timer type, display color of the timer and whether a window automatically pops up 
on expiry are also settings made in Configuration Mode for each timer label.
The remaining timer settings can be made in Monitoring Mode. If you change settings when a timer is 
running it will not be stopped. The timer will continue to count but the new settings will be applied.
To display the Setup window for a timer,
in the 
Timers
 window, select the required timer, or 
select a timer on the Main Screen then select 
Setup Timers
Timer Label
You can select from a variety of specific labels, for example Tourniquet, Infusion, Documentation or 
from four non-specific labels Timer A, B, C, D. When you assign a label to a timer, the monitor 
automatically applies the associated configuration settings to this timer, but the timer continues 
counting and is not reset.
To select a label, in the 
Timers
 window:
1
Select the required timer to display the 
Setup
 window.
2
Select 
Label
.
3
Select a specific or non-specific label from the list.
Pop-Up Keys
Selecting this pop-up key lets you....
Start
start the timer. 
Stop
stop the timer, allowing either restarting after a pause (
Start
 key) or clearing 
(
Clear
 key).
Clear
clear the timer, ending this timer episode.
Timers
return to the timer window showing all active timers