Samsung SCX-6545N Series Manual De Usuario

Loading originals and print media_ 38

After inserting paper into the tray, while pinching the paper width 

guide as shown, move it toward the stack of paper until it lightly 

touches the side of the stack. Do not press the guide too tightly to the 

edge of the paper; the guide may bend the paper. 

When you use legal-sized paper, you need to extend the length of the 

tray.
3.

Load the paper into the tray. 

Place the tray into the machine.

Set the paper size from your computer.

Load the print media you use for the majority of your print jobs in the tray 1. 
The tray 1 can hold a maximum of 500 sheets of 80 g/m

2

 (20 lb bond) plain 

paper. 
You can purchase an optional tray and attach it below the standard tray to 

load an additional 500 sheets of paper. (See "Supplies" on page 121.)

To load paper, pull and open the paper tray and place paper with the 

side you want to print facing down.

After loading paper, set the paper type and size for the tray 1. See 

"Setting the paper size and type" on page 40 for copying and faxing or 
Software section

 for PC-printing.

•

Do not push the paper width guides far enough to cause the 

materials to warp.

•

If you do not adjust the paper width guides, it may cause paper 

jams.

Using photographic paper or coated paper may cause problems, 

requiring repairs. Such repairs are not covered by Samsung’s 

warranty or service agreement.

Place the side to be printed facing up.

•

If you experience problems with paper feed, place one sheet at a 

time in the multi-purpose tray.

•

You can load previously printed paper. The printed side should be 

facing up with an uncurled edge at the front. If you experience 

problems with paper feed, turn the paper around. Note that print 

quality is not guaranteed.