Golden Technologies GL110 Manual De Usuario

LiteRider™ Owner’s Manual                                                                                                                         Rev.A_122810

 

 
Reinstall the Drivetrain 
1. Line up the two yellow tabs on the frame, with the two grooves on the drivetrain, one on 

each side of the scooter. See figure 20. 

 

2. Lower the frame onto the drivetrain until the drivetrain release lever engages. You should 
hear an audible click. 

           

Figure 20. Drivetrain Alignment                        Figure 21. Battery Pack Installation 
 
Install the Battery Pack 

3. Gently lower the battery pack onto the frame. See figure 21. 
 
Raise the Tiller 
4. Loosen the tiller adjustment knob and raise the tiller. See #1 on figure 22. 

 
5. Tighten the tiller adjustment knob at the desired position. 

– MAKE SURE YOU TIGHTEN YOUR TILLER KNOB TO BE SURE IT IS 

SECURED IN THE DESIRED POSITION! 

                    

                         

 

          Figure 22. Tiller Raised and Unlocked 

 

27                      

1 

 2