Golden Technologies GL110 Manual De Usuario

LiteRider™ Owner’s Manual                                                                                                                         Rev.A_122810

 

6. Place the under-the-seat basket onto the frame. Place the tiller basket onto the tiller. See 
#1 and #2 on figure 15 on page 24. 
 
Install the Seat 

7. Hold the seat on an angle so you can see the seat swivel post underneath 
8. Place the seat swivel post into the seat post as shown in figure 23. 
9. Push the seat down. Ensure that the seat is properly engaged by turning the seat  
slightly left and right. 

                                          
                                            Figure 23. Installing the Seat 
 

 Pinch Point! Keep hands and clothing clear of the seat swivel post and seat post. 

 Accident hazard due to non-engaged seat! Ensure that the seat is properly 

engaged by turning the seat slightly left and right. 

 
Unlock the Tiller 
10. Turn the tiller lock knob counterclockwise 90 degrees to the unlocked position. 
See #2 on figure 22 on page 27. 

 – IF YOU DON’T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER 

 Accident hazard due to incorrect seat position! Always turn the seat to face 

forwards and engage it before driving. If the seat is in any other position, the possibility of 
tipping is increased. Before turning the seat, always ensure that the scooter is on an even 
and solid surface. 

 

                                                                                                                                       28