Casio MO0602-EA Manual De Usuario

7

The altitude alarm sounds for about five seconds when the current altitude
matches a preset value during an altitude measurement operation. You can
press any button to stop the alarm after it starts to sound.
The altitude alarm sounds only while the Altimeter Mode’s Altitude Screen is
on the display. It does not sound while the watch is in another mode or while
another Altimeter Mode screen is on the display.

Example
If you set the altitude alarm at 130 meters, it sounds when you pass the 130-
meter mark on your way up and on your way back down.

1. In the Altimeter Mode, hold down E until

SET

 appears in the upper display area.

2. Release E, and wait for four or five more

seconds until either OFF or the current
reference altitude value (if set) starts to flash.
This is the setting screen.

3. Press D once to display the altitude alarm

setting.

4. Press C (+) or A (–) to change the current

altitude alarm value by 5 meters (or 20 feet).

• You can set the altitude alarm value within

the range of –10,000 to 10,000 meters
(–32,800 to 32,800 feet).

• Pressing A and C at the same time resets

the altitude alarm value to O.

5. Press E to exit the setting screen.

l l

l

l

l

ll

ll

l

l

l

l l

Altitude alarm value

1. In the Altimeter Mode, hold down E until

SET

 appears in the upper display area.

2. Release E, and wait for four or five more

seconds until either OFF or the current
reference altitude value (if set) starts to flash.
This is the setting screen.

3. Press D once to display the altitude alarm

setting.

4. Press B to toggle the altitude alarm on (ON)

and off (OFF).

5. Press E to exit the setting screen.

• An altitude alarm on indicator appears on the

Altimeter Mode’s Altitude Screen while the
altitude alarm is turned on. This indicator does
not appear on any other screen or in any other
mode.

l l

l

l

l

ll

ll

l

l

l

l l

Altitude alarm on indicator

Current on/off status

Use the Data Recall Mode to view altitude periodic records currently in
memory, as well as the current session record and the altitude historical
record. Altitude data records are created and stored in the Altimeter Mode.

The following explains the contents of each of the screens that appear in the
Data Recall Mode.

• While the periodic record, high altitude, or low altitude screen is displayed,

the bottom part of the display alternates between the measurement date
(month and day) and measurement time, at 1-second intervals.

Altitude

Measurement date
(Month – Day)

▲

▲

Alternates at

1-second intervals.

Measurement time
(Hour : Minutes)

Periodic
record
indicator

Periodic records show only data for the last save session performed with the
watch. There can be up to 40 periodic records in memory.

The historical record shows data for all save sessions performed since the
last time the historical record was cleared.

1. Enter the Data Recall Mode.
2. Use C and A  to scroll through the data and display the one you want.

High Altitude

Low Altitude

Total Ascent

Total Descent

Highest altitude reached during all
sessions.
Lowest altitude reached during all
sessions.
Total cumulative ascent during all sessions.

Total cumulative descent during all
sessions.

MAX

MIN

ASC

DSC

REC

(40)

REC

(2)

REC

(1)

MAX

MIN

ASC

DSC

REL

• To view the current session record contents, use C to scroll forward

past the last periodic record (which will display the current session
record 

MAX

 screen), or A to scroll back past the first periodic record

(to the 

REL

 screen).

3. After you are finished viewing data, press D to exit the Data Recall Mode.

• Dashes (

x

xxxx) will be displayed if data has been deleted or if there is no

corresponding data due to error, etc. In such cases, total ascent (

ASC

)

and total descent (

DSC

) values will show zero.

C

A

MAX

MIN

ASC

DSC

C

A

1. Enter the Data Recall Mode.
2. Press B to display the historical record high altitude screen (

MAX

).

3. Use C and A to scroll through the historical record screens as shown

below.

4. To return to the periodic record and current session screens, press B

again.

5. After you are finished viewing data, press D to exit the Data Recall Mode.

Use the following procedure when you want to clear the contents of the
historical record and restart all values from zero.

1. In the Data Recall Mode, press B to display

the high altitude data (

MAX

) of the historical

record.

2. Hold down E.

•

CLR

 will appear in the upper part of the

display.

3. Keep E held down for an additional two

seconds until 

CLR

 starts flashing.

• The historical record high altitude screen will

reappear when data deletion is complete.

• If you release the E button part way through

the above procedure, the watch will return to
the historical record high altitude screen
without deleting the data.

High Altitude

Low Altitude

Total Ascent

Total Descent

Relative Altitude
Change

Highest altitude reached during the
recalled session.
Lowest altitude reached during the recalled
session.
Total cumulative ascent during the recalled
session.
Total cumulative descent during the
recalled session.
Relative change in altitude during the
recalled session.

MAX

MIN

ASC

DSC

REL

The following data items show the contents of the current session record.