Motorola DTR410 Manual De Usuario
November 2008
9980384R89-E
6-2
Cloning Mode: Cloning Using the Cloning Cable
Cloning Using the Cloning Cable
1. From the Clone menu, scroll to select Duplicate Radio and press
under Select. The fol-
lowing screen is displayed indicating the target radio must now be connected to the source
radio to be cloned using the cloning cable.
radio to be cloned using the cloning cable.
2. Connect the cloning cable to both radios.
NOTE: The target radio must be turned on, but does not need to be in cloning mode.
3. Press
under
Clone to start the cloning. The “Cloning in Progress” screen is displayed
followed by the “Cloning Successful” screen. If a problem occurs the “Cloning Failed” screen
appears.
appears.
4. After cloning is completed, the target radio displays the following screen.
5. Turn target radio off then back on again to use.
6. Press
under
Reset to exit the Clone menu.