Motorola DTR410 ユーザーズマニュアル

November 2008

9980384R89-E

6-2

Cloning Mode: Cloning Using the Cloning Cable

1. From the Clone menu, scroll to select Duplicate Radio and press 

 under Select. The fol-

lowing screen is displayed indicating the target radio must now be connected to the source 
radio to be cloned using the cloning cable.

2. Connect the cloning cable to both radios.

NOTE: The target radio must be turned on, but does not need to be in cloning mode.

3. Press  

under 

Clone to start the cloning. The “Cloning in Progress” screen is displayed 

followed by the “Cloning Successful” screen. If a problem occurs the “Cloning Failed” screen 
appears.

4. After cloning is completed, the target radio displays the following screen.

5. Turn target radio off then back on again to use.

6. Press  

under 

Reset to exit the Clone menu.