Polycom E340 Manual De Usuario
SpectraLink Corporation
Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-J.doc
Page 12
2.8 Handset Displays
Status
display
Displays information from the PBX in two lines of text and displays available
softkeys in the softkey display area. The PBX text may be truncated as some PBXs
send 24 characters and the handset display area is 16 characters.
softkeys in the softkey display area. The PBX text may be truncated as some PBXs
send 24 characters and the handset display area is 16 characters.
LINE
display
Most, but not all, PBXs allow for more than one line appearance. The line
appearances are mapped to corresponding line icons across the top of the handset
display.
appearances are mapped to corresponding line icons across the top of the handset
display.
MENU
display
Most, but not all, PBXs have expanded features that are programmed to the softkeys
on the handset. Pressing the
MENU
key from the active state displays the full list of
features that have been programmed to the softkeys and their shortcut. OAI
features, if assigned, will also be displayed with their shortcuts. If configured,
features, if assigned, will also be displayed with their shortcuts. If configured,
pressing
MENU
in an active state will display the diagnostic menus.
FCN
display
The
FCN
key is used to scroll through the softkey display area. Pressing the
FCN
key
will display the next level of programmed softkeys. Pressing it repeatedly will scroll
through all four levels, or as many levels as have been programmed.
through all four levels, or as many levels as have been programmed.