Precor C952i Manual De Usuario

The Fitness Test is disabled at the factory. When the Fitness Test is 
disabled, it is not available in the list of programs. If you wish to add 
the option to the user’s choice of programs on the treadmill, you need 
to enable the Fitness Test.

Note: If you enable the Fitness Test on either the C956i or C966i, it 
replaces Custom 2 (program number 16).

16. At the FITNESS TEST prompt, use an arrow key to display 

ENABLE or DISABLE, depending on whether or not you want to 
allow access to the Fitness Test. 

17. When you are ready, press SELECT (C952i) or ENTER to save 

the selection and return to the Precor banner. 

Note:  If you prefer to exit the program without changing the 
selection, press RESET or the red STOP button.

The treadmill provides information about its use (odometer and hour 
meter), as well as software version, and error log. In general, you 
would only access this information if directed to do so by Precor 
Customer Support. 

These instructions guide you through all four informational displays.

1. At the Precor banner, press the following keys in sequence and 

without pause:

RESET, SPEED

▼, SELECT

Numbers appear on the display as you press the associated key.

MILES (KILOMETERS) appears on the display followed by the 
odometer value (the number of cumulative miles or kilometers 
users have taken).

2. When you are ready, press SELECT to move to the next display 

(hour meter).