Precor C952i Manual De Usuario

HOURS appears on the display followed by the number of hours 
that the unit has been in use. The treadmill tracks the elapsed 
minutes, but the value that appears is truncated to the nearest full 
hour.

3. When you are ready, press SELECT to move to the next display 

(software version).

UPPER SW scrolls across the display followed by the upper 
board application software part number and version (for example, 
48181-350). 

4. To see the upper boot and lower board application software 

version, press the SELECT key. If needed, you can move through 
all three—upper board, upper boot, and lower board—using the 
SELECT key.

5. Write the numbers below. You will need these numbers when you 

call Customer Support with display-related questions. This 
information will help rule out any software-related problems:

Upper Software P/N: _____________

Lower Software P/N: ___________________

Upper Boot Application P/N: ___________________

6. When you are ready, press the red STOP button or RESET to 

move to the next display (error log).

The first error log entry scrolls across the display. Up to ten error 
codes can be retrieved. If there are no errors in the log, you will 
see NO ERRORS displayed. 

7. To view any additional error codes in the error log, use the arrow 

keys. Each error code specifies when it occurred, listing the 
odometer and hour meter values. Refer to Diagram 7.

8. Copy the error code information to paper so you can provide it to 

Customer Support if needed. Be sure to copy it exactly as shown.

9. When you no longer need the information in the error log, press 

QUICKSTART for at least four seconds to erase the error log. 
Continue to maintain light pressure on the key until the message 
OK appears. When the key is released, NO ERRORS appears on 
the display, which indicates the error log has been deleted.

10. When you are ready, press SELECT, RESET, or the STOP button 

to return to the Precor banner. 

Most recent error

Error code

The hour meter at the time the error 
was detected.

Odometer reading at the 
time the error occurred.