Linksys DES-3028/DES-3028P/DES-3052/DES-3052P Manual De Usuario

DES-3028 DES-3028P DES-3052 DES-3052P  Layer 2 Fast Ethernet Switch CLI Reference Manual 

The DES-3028/28P/52/52P support the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. Users can specify 
which version of the SNMP users want to use to monitor and control the Switch. The three versions of SNMP vary in the level of 
security provided between the management station and the network device. The following table lists the security features of the 
three SNMP versions: 

v1 Community 

String 

Community String is used for authentication 

− NoAuthNoPriv 

v2c Community 

String Community String is used for authentication 

− NoAuthNoPriv 

v3 Username 

Username is used for authentication 

− NoAuthNoPriv 

v3 

MD5 

or 

SHA 

Authentication is based on the HMAC-MD5 or HMAC-SHA 
algorithms 

− AuthNoPriv 

v3 

MD5 DES or SHA DES  Authentication  is based on the HMAC-MD5 or HMAC-SHA 

algorithms 

− AuthPriv. 

DES 56-bit encryption is added based on the CBC-DES (DES-56) 
standard 

The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in 
the following table. 

create snmp user 

<SNMP_name 32> <groupname 32> {encrypted [by_password 
auth [md5 <auth_password 8-16 > | sha <auth_password 8-20>] 
priv [none | des <priv_password 8-16>] | by_key auth [md5 
<auth_key 32-32> | sha <auth_key 40-40>]  priv [none | des 
<priv_key 32-32>]]} 

delete snmp user 

<SNMP_name 32> 

show snmp user 

 

create snmp view 

<view_name 32> <oid> view_type [included | excluded] 

delete snmp view 

<view_name 32> [all | oid] 

show snmp view 

<view_name 32> 

create snmp community 

<community_string 32> view <view_name 32> [read_only | 
read_write] 

delete snmp community 

<community_string 32> 

show snmp community 

<community_string 32> 

config snmp engineID 

<snmp_engineID 10-64> 

show snmp engineID 

 

create snmp group 

<groupname 32> {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | 
auth_priv]} {read_view <view_name 32> | write_view 
<view_name 32> | notify_view <view_name 32>} 

delete snmp group 

<groupname 32> 

show snmp groups 

 

create snmp host 

<ipaddr> {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} 
<auth_string 32> 

 

30