Linksys DES-3028/DES-3028P/DES-3052/DES-3052P Manual De Usuario
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Command Parameters
delete snmp host
<ipaddr>
show snmp host
<ipaddr>
create trusted_host
<ipaddr>
delete trusted_host
<ipaddr>
show trusted_host
<ipaddr>
enable snmp traps
enable snmp authenticate traps
show snmp traps
disable snmp traps
disable snmp authenticate traps
config snmp system_contact
<sw_contact>
config snmp system_location <sw_location>
config snmp system_name
<sw_name>
enable rmon
disable rmon
Each command is listed, in detail, in the following sections.
create snmp user
Purpose
Used to create a new SNMP user and adds the user to an SNMP group that is also
created by this command.
created by this command.
Syntax
create snmp user <SNMP_name 32> <groupname 32> {encrypted
[by_password auth [md5 <auth_password 8-16> | sha <auth_password 8-20>]
priv [none | des <priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> |
sha <auth_key 40-40>] priv [none | des <priv_key 32-32>]]}
[by_password auth [md5 <auth_password 8-16> | sha <auth_password 8-20>]
priv [none | des <priv_password 8-16>] | by_key auth [md5 <auth_key 32-32> |
sha <auth_key 40-40>] priv [none | des <priv_key 32-32>]]}
Description
The create snmp user command creates a new SNMP user and adds the user to
an SNMP group that is also created by this command. SNMP ensures:
Message integrity
an SNMP group that is also created by this command. SNMP ensures:
Message integrity
− Ensures that packets have not been tampered with during
transit.
Authentication
Authentication
− Determines if an SNMP message is from a valid source.
Encryption
− Scrambles the contents of messages to prevent it from being viewed
by an unauthorized source.
Parameters
<SNMP_name 32>
− An alphanumeric name of up to 32 characters that will identify
the new SNMP user.
<groupname 32>
<groupname 32>
− An alphanumeric name of up to 32 characters that will identify
the SNMP group the new SNMP user will be associated with.
encrypted – Allows the user to choose a type of authorization for authentication
using SNMP. The user may choose:
encrypted – Allows the user to choose a type of authorization for authentication
using SNMP. The user may choose:
•
•
•
by_password – Requires the SNMP user to enter a password for
authentication and privacy. The password is defined by specifying the
auth_password below. This method is recommended.
by_key – Requires the SNMP user to enter a encryption key for
authentication and privacy. The key is defined by specifying the key in hex
form below. This method is not recommended.
authentication and privacy. The password is defined by specifying the
auth_password below. This method is recommended.
by_key – Requires the SNMP user to enter a encryption key for
authentication and privacy. The key is defined by specifying the key in hex
form below. This method is not recommended.
auth - The user may also choose the type of authentication algorithms used to
authenticate the snmp user. The choices are:
authenticate the snmp user. The choices are:
md5
− Specifies that the HMAC-MD5-96 authentication level will be used.
md5 may be utilized by entering one of the following:
31