Sonic Alert 2.8 Manual De Usuario
6.2
JTAG system-level debugger
27
6.1.1
mdebug
The mdebug image adds Ethernet and wireless download capabilities using
the Blast protocol to the Neon
the Blast protocol to the Neon
R
. The SSID and DLW commands above are
only valid when mdebug is present.
The following is an example of the use of mdebug and DLW. Note that
the first commands used download mdebug to address A1C00000 and run it
from there. Also note that the use of DLW requires a DHCP or BOOTP
server for IP address assignment.
from there. Also note that the use of DLW requires a DHCP or BOOTP
server for IP address assignment.
DLW example
. dl a1c00000
CCCCCCCCCCC
enter binary file name: mdebug
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC.....................
...................................................
73620 bytes, 72 packets, 0 retrys
OK A1C00000-A1C12000
. g a1c00000
$S00#b3
Reset A0008000
R0:
CCCCCCCCCCC
enter binary file name: mdebug
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC.....................
...................................................
73620 bytes, 72 packets, 0 retrys
OK A1C00000-A1C12000
. g a1c00000
$S00#b3
Reset A0008000
R0:
00000000
R1:
0000014C
R2:
00000001
R3:
00000060
R4:
A1F1D540
R5:
A1F22B1C
R6:
A1E9BECC
R7:
00000002
R8:
A1E9BFDC
R9:
A1E9BE88
SL:
00000000
FP:
A1E9BE10
IP:
A1E9BE14
SP:
A0003400
LR:
A0008000
PC:
A0008000
CPSR 600000D3
FP0: 0000000000
.
. dlw a0008000
Boundary Devices 1
SMC91C11xFD
%s: PHY=LAN83C183 (LAN91C111 Internal)
%s: PHY remote fault detected
%s: Ethernet Link Detected
%s: PHY 100BaseT
%s: PHY Half Duplex
valid mac address
00:50:C2:06:30:8F
..........DISC:received 0x012C bytes of reply
done
REQ:received 0x012C bytes of reply
done
router at 192.168.0.1
DNS server at 68.2.16.25
DNS server at 68.2.16.30
DNS server at 68.6.16.30
DHCP success, using IP 192.168.0.14
ready to receive file
. dlw a0008000
Boundary Devices 1
SMC91C11xFD
%s: PHY=LAN83C183 (LAN91C111 Internal)
%s: PHY remote fault detected
%s: Ethernet Link Detected
%s: PHY 100BaseT
%s: PHY Half Duplex
valid mac address
00:50:C2:06:30:8F
..........DISC:received 0x012C bytes of reply
done
REQ:received 0x012C bytes of reply
done
router at 192.168.0.1
DNS server at 68.2.16.25
DNS server at 68.2.16.30
DNS server at 68.6.16.30
DHCP success, using IP 192.168.0.14
ready to receive file
enter binary file name: cramfs.img
...........................................................
................
transmitted in 52 seconds
.[eof]
lost 0x00000000 packets
[eof] in 52 seconds
sent 19783680 bytes of file to 192.168.0.14
Error free!!!
...........................................................
................
transmitted in 52 seconds
.[eof]
lost 0x00000000 packets
[eof] in 52 seconds
sent 19783680 bytes of file to 192.168.0.14
Error free!!!
0x012DE000 bytes written to buffer at A0008000 A12E6000
6.2
JTAG system-level debugger
The jtag executable provided by Boundary Devices is based on the one
provided by the
provided by the
project.
Our main goals in developing the jtag program were to aid in hardware
debugging and to allow the first flash EEPROM image to be burned onto
December 28, 2005
Revision 2.8