ARRI ARRIFLEX 235 Manual De Usuario

The lens support consists of the lens support LS-7 (can be 

snapped onto 19 mm support rods) 

➪ 

 or the lens 

support LS-8 (can be pushed onto 15 mm support rods) and 

the respective lens support ring 

➪ 

 for the lens in use.

•  Mount the lens support onto the support rods from above 

and let it click into place by applying slight pressure 

(push the LS-8 onto the support rods from the front).

•  Slide the relevant support ring 

➪ 

 onto the lens 

but do not tighten.

•  Then slide the lens into the lens mount receptacle and lock.

•  Connect the support ring to the lens support and tighten 

the knurled screw 

➪ 

 as well as the clamping 

lever 

➪ 

.

•  Complete the process by tightening the clamp screw 

➪ 

 on the support ring.

Note: 

Mounting the support ring on the relevant lens 

is usually carried out only once. The support 

ring can then remain in position on the lens.

base plate

lens support 

LS-8

lens support ring

clamp screw

wedge plate

knurled screw

lens support 

LS-7

clamping lever