ARRI ARRIFLEX 235 Manual De Usuario

The low mode handle is a triple post handle. It can be mounted 

to the camera using 3 hexagonal screws 

➪ 

.

To the low mode handle various accessories can be attached 

using the 3/8” holes. 

The low mode handle can be extended with the handle 

extension block 

➪ 

. The handle extension block 

can be mounted to any of the 3/8” holes by first placing 

the 2 pins 

➪ 

 into the according pin holes on the 

handle and then fastening the extension block screw 

➪ 

 inside the extension block  by using a long 

5mm allen key. Note that the viewfinder cannot be swung 

over to the camera right side when the Handle Extension 

Block is attached to the front of the Low Mode Handle. 

Note: 

The low mode handle is positioned in the center 

of gravity.

hexagonal screws

handle extension block

handle extension block

pins

extension block 

screw