Ricoh K-S2 Manual De Usuario
2
33
G
e
tting St
arted
2
Face the A mark on the
battery towards the
outside of the camera, and
insert the battery until it
locks into place.
battery towards the
outside of the camera, and
insert the battery until it
locks into place.
To remove the battery, push the
battery lock lever in the direction
of 2.
battery lock lever in the direction
of 2.
3
Close the battery cover.
t
Memo
• The battery level may not be displayed properly if the camera
is used at low temperatures or when performing Continuous
Shooting for a long time.
Shooting for a long time.
• Battery performance temporarily decreases as the
temperature decreases. When using the camera in cold
climates, have extra batteries at hand and keep them warm in
your pocket. Battery performance will return to normal at
room temperature.
climates, have extra batteries at hand and keep them warm in
your pocket. Battery performance will return to normal at
room temperature.
• Have extra batteries ready when traveling overseas, or taking
a lot of pictures.
We recommend the use of the optional AC adapter kit K-AC128
when using the monitor for a long time or when connecting the
camera to a computer or AV device.
when using the monitor for a long time or when connecting the
camera to a computer or AV device.
1
Make sure that the camera is turned off.
2
Open the battery cover.
Remove the battery if it is inserted in the camera.
3
Pull out the connection
cable cover on the right
side of the battery
chamber.
cable cover on the right
side of the battery
chamber.
4
Insert the DC coupler into
the battery chamber.
the battery chamber.
5
Close the battery cover.
Make sure that the connection
cable comes out from the
connection cable opening.
cable comes out from the
connection cable opening.
2
Using the AC Adapter