Ricoh K-S2 Manual De Usuario
2
34
G
e
tting St
arted
6
Connect the DC coupler and the AC adapter.
7
Connect the AC adapter to the AC plug cord, and
plug the cord into the power outlet.
plug the cord into the power outlet.
u
Caution
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that connections are secure between the
terminals. The memory card or data may be corrupted if the
connection to the power supply is lost while the card is being
accessed.
connection to the power supply is lost while the card is being
accessed.
• After removing the DC coupler, return the connection cable
cover to its original position.
• Be sure to read the manual of the AC adapter kit before using
the AC adapter.
The following memory cards can be used with this camera.
• SD Memory Card
• SDHC Memory Card
• SDXC Memory Card
In this manual, these cards are referred to as memory cards.
• SD Memory Card
• SDHC Memory Card
• SDXC Memory Card
In this manual, these cards are referred to as memory cards.
1
Make sure that the camera is turned off.
2
Slide the memory card
cover in the direction of 1
and then rotate it to open
as shown by 2.
cover in the direction of 1
and then rotate it to open
as shown by 2.
3
Insert the card all the way
into the memory card slot
with the memory card label
facing toward the side with
the monitor.
into the memory card slot
with the memory card label
facing toward the side with
the monitor.
Push the memory card in once
and release to remove.
and release to remove.
Inserting a Memory Card
2
1