Avaya 03-300430 Manual De Usuario
![Avaya](https://files.manualsbrain.com/attachments/539de53b12b0cfce0bb8cf1e3bb961e969d9f556/common/fit/150/50/0bfb423b07b431ecf5ac095ccde7771f5eac50e962dfba59f8e256280b3d/brand_logo.png)
ADX16D-P (16-Port AUDIX Digital Port)
Issue 1 June 2005
359
Table 97: Test #9 NPE Crosstalk Test
Error
Code
Code
Test
Result
Result
Description / Recommendation
1
ABRT
During testing of the primary information channel, system resources may
not have been available. Also, the port may have been busy during the test.
not have been available. Also, the port may have been busy during the test.
1. Check the port status.
2. Use display port location to determine the voice port extension
of the port. Use status station to determine the service state of the
port. If the port is active, it is unavailable for this test. Wait until the port
is idle.
is idle.
3. Retry the command at 1-minute intervals up to 5 times.
2
ABRT
System resources may not have been available, or the port may have been
busy during the test.
busy during the test.
1. Verify that the port’s status is idle.
2. Retry the command at 1-minute intervals up to 5 times.
1000
ABRT
System resources required to run this test are not available. The port may
be active.
be active.
1. Use display port location to determine the voice port extension
of the port. Use status station to determine the service state of the
port. If the port is active, it is unavailable for certain tests. Refer to
“Status” commands in
“Status” commands in
in Maintenance
Commands Reference (03-300191), for a full description of every
possible state. Wait until the port is idle before testing.
possible state. Wait until the port is idle before testing.
2. If the port’s status is idle, retry the command at 1-minute intervals up to
5 times.
1001
ABRT
System resources required to run this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
1002
ABRT
The system could not allocate time slots for the test. The system may be
under heavy traffic conditions, or it may have time slots out-of-service due
to TDM-BUS errors.
under heavy traffic conditions, or it may have time slots out-of-service due
to TDM-BUS errors.
1. If the system has no TDM-BUS errors and is not handling heavy traffic,
retry the command at 1-minute intervals up to 5 times.
1 of 2