Genie SILENTMAX 1000/1200 Manual De Usuario

• Use extreme caution when working from a ladder or step stool.
• When replacing light cover, make sure wires are not pinched or
  near moving parts.

 

•   Screw drive models: Verify shuttle release lever is in ENGAGED

(UP) position (pull release handle toward opener and let go)

•   Chain/belt drive models: Verify bullet is engaged to carriage.  

Pull/release cord down and back towards opener and let go.

    – Operate door using a remote or wall console.
    – Door will re-attach itself to carriage assembly.

 

1. Disconnect power to door opener.
 •  Open powerhead light cover.
 •  Remove light bulb(s).
 • Replace light bulb(s).
    –  

DO NOT use light bulbs with greater than 100 Watt rating,  
PowerLift

® 

900, GPower

™ 

900

 

require light bulbs of no more 

than 60 watts. Compact CFL's may also be used.

    –  Close powerhead light cover.
2. Reconnect power to door opener.
  •  Test light operation.

Reset Open/Close Travel Limit
Performing all eleven (11) Limits/Force setting steps (see pages 6-8) 

erases previous Limits/Force settings.

Remote Battery Replacement
Replace remote battery with a CR 2032 coin cell battery.
1. Open remote case using a washer or coin that fits into the slot at   
  top of remote.
2. Replace battery.
3. Align components and snap case  
 closed.

To 

engage bullet to carriage, 

pull the release handle down and 
toward the opener.

To 

disengage bullet from carriage, 

pull relaese handle down and 
toward the door.

To 

engage shuttle to carriage, 

pull down and toward the opener.

To 

disengage shuttle from carriage, 

pull down on relaese hanfle.

G999-393 Manual-ScrewBeltChain-EN indd   17

7/13/12   10 17 AM