Regency P33-LP3 Manual De Usuario

Regency P33-3 Zero Clearance Direct Vent Gas Fireplace

1)   Before beginning the installation, remove the Glass Door from the 

unit. Refer  to  the manual for instructions.

2)  Slide the Bottom Face Plate Bracket into the bottom of the unit,  

secure it into  the pins located on the inside of the fi re box. Once the 
bracket is in place, tighten the screws into the hinges on the left and 
right sides.

4)   a) 

Before attaching the Full Screen Door Frame to the unit,  

 

loosen the left and right side #8 Self Tapping Philips  screws  

 

located on the inside top of the outer frame of the appliance.  

 

Also remove the center screw.

 b)  

Slide the cut-outs in the Top and Bottom Flange of the Full  

 

Screen Door Frame under the screw heads which were  

 

loosened in step 4a). Once the Frame is in place, tighten  

 

the screws to secure.  Also re-secure the top center screw

 

        through the oblong hole.

3)  Before attaching the Full Screen Door Frame, remove the Screen 

Doors from the Full Screen Door Frame by fully opening the doors 
and lifting up off of the hinges. See important note in step 10.

Pin location

  

Bottom Faceplate 
Bracket

Full Screen Door 
Frame

Faceplate 
Mounting 
Bracket

Screw