Regency P33-LP3 Manual De Usuario

Regency P33-3 Zero Clearance Direct Vent Gas Fireplace

The optional Bay door is an overlay on the 
fl ush front. The standard fl ush door and glass 
must remain on the unit. 

1)  Hook the top of the bay door over the fl ush 

door fl ange and swing the bottom against 
the bottom fl ange of the fl ush door. 

2)  Secure to the fl ush door bottom bracket with 

2 screws provided.

3)  Slide the valve extension knobs onto the 

valve knobs. 

1)  Install the top louver by sliding the two 

bracket clips into the brackets located un-
derneath the top of the fi rebox.

2)  Install the bottom louver by folding the louver 

down and then sliding the Bottom Louver 
bracket down onto the 2 pins on the base 
of the unit (dia. 1). Secure with 1 screw as 
per dia. 2.

3)  Open the bottom louver. Pull the Burner 

ON/OFF control box from inside the bottom 
of the fi replace and position the slots in the 
bracket over the 2 screws on the left side of 
the bottom louver. Push down to lock into 
place. Tighten the screws.

Attach  4 supplied magnets each to the back of 
the top and bottom trim pieces, and attach trim 
to the top and bottom of Bay door. 

1)  Pull out the top louver.

2)  Center the screen door and hook over the 

fl ush door.

3)   Open the screen door(s) and secure the 

screen door to the fl ush door front with 2 
clips on the bottom left and right side.