Desa (V)KC42PE Manual De Usuario

Descargar
Página de 40
www.desatech.com
116240-01E
30
CLEANING AND 
MAINTENANCE
 WARNING: Turn off fireplace 
and let cool before cleaning.
 CAUTION: You must keep con-
trol areas, burners and circulating 
air passageways of fireplace clean. 
Inspect  these  areas  of  fireplace 
before  each  use.  Have  fireplace 
inspected  yearly  by  a  qualified 
service  person.  Fireplace  may 
need more frequent cleaning due 
to excessive lint from carpeting, 
bedding material, pet hair, etc.
GLASS DOOR
 WARNING: Handle glass door 
panel with care. Do not strike, slam 
or otherwise abuse glass. Do not 
operate  fireplace  with  the  glass 
door unlatched, removed, cracked 
or broken. 
 WARNING: Do not use abra-
sive cleaners as this may damage 
glass. Use a nonabrasive house-
hold glass cleaner to clean glass. 
Do not clean glass when hot.
Glass must be cleaned periodically. During start-up 
it is normal for condensation to form on the inside 
of the glass causing lint, dust and other airborne 
particles to cling to the glass surface. During initial 
start-up a slight film may form on the glass due to 
paint curing. The glass should be cleaned several 
times with a non-ammonia, nonabrasive household 
cleaner and warm water after the first two weeks of 
operation. Thereafter, clean the glass two or three 
times during each heating season, depending on the 
usage and circumstances present. Refer to Remov-
ing/Replacing Glass Door, page 24 of this manual 
when removing glass door for cleaning.
 WARNING: Only parts sup-
plied by the manufacturer should 
be used when replacing broken 
or  damaged  glass  door  panel 
(see  Replacement  Parts,  page 
34).  This  glass  door  panel  is 
a  complete  unit.  No  substitute 
materials may be used. 
 CAUTION: Wear gloves and 
safety glasses while handling or 
removing broken glass. Do not re-
move if glass is hot. Keep children 
and pets away from glass.
If glass has been broken, carefully remove glass 
door (see Removing/Replacing Glass Door, page 
24). Vacuum all glass pieces with a shop vac.
 CAUTION: Do not vacuum if 
pieces are hot.
Use only the tempered glass door replacement 
intended for this fireplace (see Replacement Parts
page 34 for detail on ordering). No substitutions 
may be made. See Removing/Replacing Glass Door
page 24 for instructions for replacing glass door.
 WARNING: Do not operate fire-
place with the glass door unlatched, 
removed, cracked or broken. 
PILOT AND BURNERS
•  Remove ember material before cleaning burners 
and replace when cleaning is complete.
•  Burner and controls should be cleaned with 
compressed air to remove dust, dirt or lint.
•  Use a vacuum cleaner or small, soft bristled 
brush to remove excess dust, dirt or lint.
LOGS
•  If you remove logs for cleaning, refer to Install-
ing Lava Rock and Glowing Embers, page 25, 
to properly replace logs.
•  Use a vacuum cleaner to remove any carbon 
buildup on logs.
•  Replace log(s) if broken. See Replacement 
Parts on page 34.
•  Replace ember material periodically as needed. 
See Replacement Parts on page 34.