Marantz NR1402 Manual De Usuario

11

The acoustic characteristics of the connected speakers and 
listening room are measured and the optimum settings are made 
automatically. This is called “Audyssey® Auto Setup”.
To perform measurement, place the setup microphone in 
multiple locations all around the listening area. For best results, 
we recommend you measure in six positions, as shown in the 
illustration (up to six positions).
• When performing Audyssey® Auto Setup, Audyssey MultEQ®/

Audyssey Dynamic EQ®/Audyssey Dynamic Volume® functions 
become active (

).

• To set up the speakers manually, use “Speaker Setup” 

) on the menu.

• Make the room as quiet as possible. Background noise can disrupt 

the room measurements. Close windows, silence cell phones, 
televisions, radios, air conditioners, fluorescent lights, home 
appliances, light dimmers, or other devices as measurements may 
be affected by these sounds.

• Cell phones should be placed away from all audio electronics during 

the measurement process as Radio Frequency Interference (RFI) 
may cause measurement disruptions (even if the cell phone is not 
in use).

• Do not unplug the setup microphone from the main unit until 

Audyssey® Auto Setup is completed.

• Do not stand between the speakers and setup microphone or allow 

obstacles in the path while the measurements are being made. This 
will cause inaccurate readings.

• Loud test sounds may be played during Audyssey® Auto setup. This 

is part of normal operation. If there is background noise in room, 
these test signals will increase in volume.

• Operating 

 +, – during 

the measurements will cancel the 
measurements.

• Measurement cannot be performed when 

headphones are connected.

Here, we explain “Audyssey® Auto Setup”, which allows you to 
automatically make the optimal settings for your speakers.

n Set up speakers (Audyssey® Auto Setup) 

• Measurements are performed by placing the setup microphone 

successively at multiple positions throughout the entire listening 
area, as shown in 

GExample qH. For best results, we recommend 

you measure in six positions, as shown in the illustration (up to six 
positions).

• Even if the listening environment is small as shown in 

GExample wH, 

measuring at multiple points throughout the listening environment 
results in more effective correction.

(  : Measuring positions)

GExample qH

GExample wH

(  : Measuring positions)

FL Front speaker (L)

SW Subwoofer

FR Front speaker (R)

SL Surround speaker (L)

Center speaker

SR Surround speaker (R)

The main listening position is the position where listeners would 
normally sit or where one would normally sit alone within the listening 
environment. Before starting Audyssey® Auto Setup, place the setup 
microphone in the main listening position. Audyssey MultEQ® uses 
the measurements from this position to calculate speaker distance, 
level, polarity, and the optimum crossover value for the subwoofer.

vSee overleaf