Runco LS-100d Manual De Usuario

RGB-HD or Component HD 
images appear “noisy” or drop 
out intermittently. 

• Tracking and Phase 

settings need adjustment. 

• The DHD Controller is 

having difficulty detecting 
sync pulses from the 
source. 

• Adjust Tracking and Phase 

settings (refer to Input 
Position on page 44).

• Adjust the Sync Threshold 

setting (refer to Sync 
Threshold on page 63).

Computer images do not dis-
play correctly. 

• The resolution and 

frequency of the video card 
in the computer are not 
compatible with the 
LS-100d.

• Select a compatible 

resolution and vertical 
frequency (refer to 
Supported Timings on 
page 95). 

Images from an HDMI source 
do not display. 

• The resolution and 

frequency of the video card 
in the computer are not 
compatible with the 
LS-100d.

• EDID compatibility issue. 

• HDMI cable from source to 

DHD Controller is either 
defective or too long. 

• Select a compatible 

resolution and vertical 
frequency (refer to 
Supported Timings on 
page 95). 

• Set HDMI EDID Extension 

to “Off” (refer to HDMI 
EDID Extension on 
page 63).

• Try a known-good and/or 

shorter HDMI cable. 

Video from an HDMI source 
lags behind audio. 

• Refer to Audio/Video 

• Use an external A/V 

receiver with audio delay 
capability to synchronize 
the audio signal with the 
video signal.

The image is too large or too 
small.

• Image size needs adjusting. 

• Adjust the image size (refer