Справочник Пользователя для Runco LS-100d
68
Lightstyle™ Series LS-100d Installation/Operation Manual
PRE
L
IMINAR
Y
RGB-HD or Component HD
images appear “noisy” or drop
out intermittently.
images appear “noisy” or drop
out intermittently.
• Tracking and Phase
settings need adjustment.
• The DHD Controller is
having difficulty detecting
sync pulses from the
source.
sync pulses from the
source.
• Adjust Tracking and Phase
• Adjust the Sync Threshold
setting (refer to Sync
Threshold on page 63).
Threshold on page 63).
Computer images do not dis-
play correctly.
play correctly.
• The resolution and
frequency of the video card
in the computer are not
compatible with the
LS-100d.
in the computer are not
compatible with the
LS-100d.
• Select a compatible
Images from an HDMI source
do not display.
do not display.
• The resolution and
frequency of the video card
in the computer are not
compatible with the
LS-100d.
in the computer are not
compatible with the
LS-100d.
• EDID compatibility issue.
• HDMI cable from source to
DHD Controller is either
defective or too long.
defective or too long.
• Select a compatible
• Set HDMI EDID Extension
to “Off” (refer to HDMI
EDID Extension on
page 63).
EDID Extension on
page 63).
• Try a known-good and/or
shorter HDMI cable.
Video from an HDMI source
lags behind audio.
lags behind audio.
• Refer to Audio/Video
• Use an external A/V
receiver with audio delay
capability to synchronize
the audio signal with the
video signal.
capability to synchronize
the audio signal with the
video signal.
The image is too large or too
small.
small.
• Image size needs adjusting.
• Adjust the image size (refer
Table 5-1. Troubleshooting Chart (continued)
Symptom
Possible Cause(s)
Solution