Windsor 10052250 Manual De Usuario

Descargar
Página de 33
TECHNICAL SPECIFICATIONS 
CUTTER 24V   86039070   04/10/07 
 3-1
 
ITEM DIMENSION/CAPACITY 
Nominal power 
1450 W 
Rated Voltage 
24VDC 
Rated Amperage 
60 Amps  
Batteries 
4 X 6 Volt  250-305-335 AH @  
20 hr rate 
Scrub Brush Motors 
2 X .75 hp (0.56 kW) 
Vacuum Motor 
.75 hp (0.56 Kw) 
Propelling Motor 
.3 hp (0.22 Kw) 
Mass (GVW) 
915 lbs. (415 kg) with 335 AH 
Weight empty without batteries 
346 lbs. (157 kg) 
Solution Control 
Gravity feed, fully variable with 
automatic shut-off in neutral 
Solution tank capacity 
23 gal. (87 l) 
Recovery tank capacity  
25 gal. (95 l) 
Scrub brush diameter for 26 in. (66 cm) scrub head 
13 in (33.0 cm) 
Scrub brush pressure 
Mechanical 80 lbs. (356N) 
Floating 130 lbs. (578N) 
restricted 
 
Scrub brush speed 
200 rpm 
Tires 
2 x 10 in (25.4 cm) non-marking 
foam-filled 
Casters 
2 X 4 in (10.2 cm) polyurethane 
solid non-marking 
Foundation Pressure  
21 lbs./in 
2
 (140 kPa) 
Maximum Speed 
3.2 Miles/hour (5.2 km/hour) 
Coverage with 26 in. (66 cm) scrub head 
31,680 ft
2
/hour at 3.0 mph with  
2 in. overlap* 
Frame Construction 
Steel plate with epoxy 
powdercoat finish. 
Brakes (optional) 
Tire lock parking brake 
Minimum aisle u-turn width with 26 in. (66 cm) scrub head 
69 in. (175 cm) 
Maximum rated climb and descent angle with empty tanks 
and without optional parking brake 
2%  
Maximum rated climb and descent angle with full tanks 
and without optional parking brake 
2%  
 
* Cleaning rate results will vary depending on floor type, building structure, etc.